Loading...

1100M Starter Package

close
Total / Financing
Base Machine
Build Options
Total
or
Financing
*Financing is calculated at check out

Finish making your selections, then hit Finish & Review.

Need Assistance?
Request a Demo New call-to-action

1100M Starter Package

1100M Mill This product is required for the machine. $10,995.00
More Info
1100M Printed Manual $19.95
More Info
1100M / 1100MX Stand $2,295.00
More Info
1100M Chip Tray $0.00
More Info
Manual Oil Pump $0.00
More Info
Lubricates ways on X-. Y- & Z-Axis. Requires manual pumping (x3) per 8 hour shift. Not recommended for unattended machining.
Automatic Oiler Kit (230V) for 1100M / 1100MX $645.95
More Info
Automatically lubricates ways on X-. Y- & Z-Axis. Ideal for environments with multiple operators where dedicated maintenance needs might be missed. Ideal for long cycle times or unattended use. Recommended with servo machines.
Door Lock Switch Kit $295.00
More Info
This kit reduces risk by allowing you to lock enclosure doors during potentially hazardous machining operations. Recommended option for schools.
1100M Enclosure Kit $3,095.00
More Info
1100M Backsplash Kit $299.95
More Info
Lifting Bar Kit $195.00
More Info
Recommended to safely place mill on top of stand. Keeps the machine level and balanced when used with a machine hoist.
Buck-Boost Transformer $229.95
More Info
The Buck-Boost Transformer is recommended for minor increases of stable line voltages less than 230VAC to eliminate performance degradation.
Machine Way Oil (1 Gallon) $44.95
More Info
Way oil holds in place, so slides are properly lubricated, reducing friction.
Lyndex TTS™ Adapter Collet: R8 This product is required for the machine. $0.00
More Info
Power Drawbar Kit for 1100M / 770M $1,195.00
More Info
12-Pocket Automatic Tool Changer for the 1100M $5,775.00
More Info
California Air Tools 4610XC Air Compressor $349.95
More Info
microARC 4 - 100 mm 4th Axis $2,795.00
More Info
6 in. Motorized Rotary Table $1,595.00
More Info
6 in. Super Spacer Motorized Rotary Table $2,595.00
More Info
6 in. Tilting Motorized Rotary Table $2,495.00
More Info
8 in. Motorized Rotary Table $1,795.00
More Info
8 in. Super Spacer Motorized Rotary Table $2,995.00
More Info
8 in. Tilting Motorized Rotary Table $2,995.00
More Info
4th Axis Driver and Installation Kit (M/MX) $200.00
More Info
3 Jaw Chuck for 6 in. (152 mm) Table $395.00
More Info
4 Jaw Chuck for 6 in. Table $395.00
More Info
2 Jaw Chuck for 6 in. Table $299.95
More Info
Flood Coolant Kit (1/8 HP) for 1100M/MX and 770M/MX $499.95
More Info
FogBuster Coolant Kit (230 Vac) for 1100M/1100MX $599.95
More Info
QualiChem XTREME CUT 251C $59.95
More Info
Oil Skimmer Kit for 1100M/1100MX, 770M/770MX, and PCNC 440 $279.95
More Info
Portable Refractometer - Coolant Tester $19.95
More Info
SmartCool Starter Kit $699.95
More Info
Passive Probe Kit $429.95
More Info
Active Probe Kit $1,795.00
More Info
HAIMER 3D-Sensor New Generation Kit (Metric) $519.95
More Info
Metric Ball Replacement Tip for Haimer Zero Master/ 3D Sensor $54.95
More Info
Electronic Tool Setter $1,295.00
More Info
Replacement Probe Tip $119.95
More Info
TTS™ Touch Tool w/Digital Indicator and Box $79.95
More Info
TTS™ Touch Tool w/Mechanical Indicator and Box $49.95
More Info
Dial Test Indicator Kit $159.95
More Info
1/2 in. Shank Edge Finder $14.95
More Info
Essential Metalworking Gauge Kit $295.95
More Info
3/8 in. Shank Edge Finder $13.95
More Info
Laser Edge/Center Finder (Bullseye) $159.95
More Info
Laser Edge/Center Finder (Center Spot) $129.95
More Info
Basic 3 Piece Indicator Set $129.95
More Info
Digital Micrometer (0-1 in.) $59.95
More Info
Digital Caliper (0-6 in.) $27.95
More Info
Stop-Loc Setup Tool $19.95
More Info
5 in. Machinist Vise - Precision Angle Lock $549.00
More Info
5 in. (127 mm) CNC Vise $499.95
More Info
4 in. CNC Vise $395.00
More Info
Saunders Machine Works Tooling Plate for 1100 Mills $1,149.00
More Info
1100 Basic Fixture Accessory Kit $534.93
More Info
Standard Fixture Plate Accessory Upgrade Kit $497.85
More Info
VersaGrip™ Vise Jaws - Mitee-Bite - Compatible with Tormach 4 in. and 5 in. vises $185.00
More Info
6 in. TalonGrip™ Vise Jaw Systems  - Mitee-Bite - Compatible with Tormach 4 in. and 5 in. vises $170.00
More Info
Modular Vacuum Chuck Kit $299.95
More Info
Clamp Kit for 5/8 in. T-Slots (58 Pcs.) $89.95
More Info
Standard 5 in. Steel Step Jaw Set $59.95
More Info
Standard 5 in. Aluminum Soft Jaw Set $22.95
More Info
SuperSoft Jaws Kit $174.95
More Info
Multi-V 5 in. Jaw Set $114.95
More Info
5 in. (127 mm) Pin Jaw Set $199.95
More Info
5 in. (127 mm) Parallel Set $49.95
More Info
Work Stop $49.95
More Info
1-2-3 Block Set $24.95
More Info
TTS™ CNC Operator Set with Tormach Tool Assistant $1,195.95
More Info
TTS™ Metric Tool Holder Set $1,295.95
More Info
Modular Tension/Compression Tapping Head Kit $459.95
More Info
Manual Operator Set (Inch) $249.95
More Info
Manual Operator Set (Metric) $249.95
More Info
End Mill Kit for Aluminum #1 $499.95
More Info
YG-1 V7 Plus A Series Steel, Cast Iron & Stainless End Mill Kit $595.50
More Info
1/16 in. - 1/2 in. Machine Length Drill Set $184.95
More Info
PathPilot Software Bootable USB Drive - Recovery Media $24.95
More Info
G Wizard Machinist Calculator for Tormach $79.95
More Info Stock: In Stock
SprutCAM OEM Standard $1,395.00
More Info Stock: In Stock
SprutCAM OEM Advanced $2,495.00
More Info Stock: In Stock
PathPilot Controller This product is required for the machine. $495.00
More Info
PathPilot Controller Vesa Mount This product is required for the machine. $0.00
More Info
Standard LCD Monitor $279.95
More Info
Touch Screen Kit $459.95
More Info
Waterproof Mouse $24.95
More Info
Waterproof Mini-Keyboard $44.95
More Info
Jog Shuttle Controller $99.95
More Info
Controller Arm $359.95
More Info
Spindle Speeder $1,895.00
More Info
USB M-Code I/O Interface Kit $269.95
More Info
High Speed Spindle Kit for Tormach 1100 $1,695.00
More Info
QC Motor Connection Kit $189.95
More Info
Oil Skimmer Kit for 1100M/1100MX, 770M/770MX, and PCNC 440 $279.95
More Info
Water Chiller Kit $0.00
More Info
Water Chiller Treatment, 8 oz. $29.95
More Info
Starter Tool Kit for High Speed Spindle $249.95
More Info
1100M Extended Warranty $795.00
More Info
Machine Assembly (Optional) $2,995.00
More Info Stock: In Stock
RapidTurn Starter Package $2,995.00
More Info
RapidTurn Deluxe Package $3,795.00
More Info
TTS™ Set Screw Holder: 3/8 in. $30.95
More Info
TTS™ Set Screw Holder: 1/2 in. $30.95
More Info
TTS™ Set Screw Holder: 12mm $30.95
More Info
TTS™ Set Screw Holder: 10mm $30.95
More Info
TTS™ Set Screw Holder: 6mm $30.95
More Info
TTS™ Set Screw Holder: 5/16 in. $24.95
More Info
TTS™ Set Screw Holder: 1/4 in. $29.95
More Info
TTS™ ER Collet Holder: ER16 $49.95
More Info
TTS™ ER Collet Holder: ER20 $49.95
More Info
TTS™ ER Collet Holder: ER32 $59.95
More Info
TTS™ ER Collet Tap Holder: ER20 $189.95
More Info
TTS™ ER Collet Tap Holder: ER16 $189.95
More Info
ER20 Collet Set (30 Pcs.) $249.95
More Info
ER20 Collet Set (15 Pcs.) $99.95
More Info
ER16 Collet Set (22 Pcs.) $199.95
More Info
ER32 Collet Set (12 Pcs.) $184.95
More Info
Metric ER20 Collet Set (14 Pcs.) $214.95
More Info
Metric ER32 Collet Set (12 Pcs.) $214.95
More Info
Metric ER16 Collet Set (12 Pcs.) $145.95
More Info
Huot ER20 Collet Rack $69.95
More Info
Huot ER16 Collet Rack $69.95
More Info
TTS™ Diamond Drag Engraver Kit $99.95
More Info
TTS™ Rotary Broach Kit $595.95
More Info
TTS™ Saw Arbor: 1/2 in. $69.95
More Info
TTS™ Saw Arbor: 1 in. $69.95
More Info
TTS™ Machinable Blank $29.95
More Info
Spring-Loaded CNC Drag Knife $169.95
More Info
TTS™ SuperFly Cutter Kit $164.95
More Info
TTS™ MiniShear .750 in. $289.95
More Info
XDET 2.522 (Mini-Shear) Insert 10-Pack $224.95
More Info
XDET 2.52-010 (Mini-Shear) Insert 10-Pack $249.95
More Info
Mini-Shear - .500 in. $244.95
More Info
DIJET QM Mini Modular Insert High Feed End Mill: 1/2 in. $269.95
More Info
TTS™ M6 Threaded Arbor: Short $39.95
More Info
Milling Insert: EOMW060210ZER (DIJET QM MINI) 10-Pack $94.95
More Info
Milling Insert: ZOMT060202ZER (DIJET QM MINI) 10-Pack $94.95
More Info
Milling Insert: EOHW060220ZTR (DIJET QM MINI) 10-Pack $164.95
More Info
Mini-Shear - .500 in. MIT Cutting Head $239.95
More Info
Modular Insert End Mill: 17 mm $99.95
More Info
Carbide Insert for Aluminum and Plastic - Face & End Mills 10-Pack $124.95
More Info
Anti-Fatigue Tormach Logo Mat $49.95
More Info
PathPilot Keyboard Shortcuts Mousepad $14.95
More Info
36 in. x 24 in. Satin Tormach Banner with Top Grommets $22.95
More Info

* Required Fields