8L LATHE TECHNICAL SPECIFICATIONS

Loading...

Spindle

  • Spindle Power: 1.5 hp (1.11 kW)
  • Spindle Speed:
    • Low: 180 to 2,500 RPM
    • High: 350 to 5,000 RPM
  • Through Spindle Bore: 1 in. (25.4 mm)
  • Spindle Nose: 5C

Control

  • Standard Features: Single Point Threading, Rigid Tapping

Tailstock

  • Taper: MT2
  • Diameter: 0.9 in. (22 mm)
  • Travel: 2.2 in. (55 mm)

Travels

  • X-Axis: 4.5 in. (114 mm)
  • Z-Axis: 10 in. (254 mm) with tailstock

Motion

  • X- and Z-Axis: Maximum Feed Rate150 IPM (3.8 m/min)
  • Axis Drivers (X ,Z): High-Performance Polyphase Stepper Motors with Leadshine® Microstepping Drivers

Power

  • Power Requirements: Single-Phase 115 Vac, 50/60 Hz, 15A breaker

Machine Specifications

  • Table Length × Width: 7.5 in. × 4 in. (191 mm × 102 mm)
  • Machine Footprint: 50in. x 26in. (1.2 m × 0.7 m)
  • Typical System Weight: 838 lbs. (380 kg)
  • Maximum Swing Over Bed: 8 in. (200 mm)
  • Maximum Swing Over Carriage: 4 in. (100 mm)
  • Overall System Height: 52in. (1.3 m)

Accessories

  • Quick Change Tool Post (Standard)
  • Full Enclosure (Standard)

Controller


PATHPILOT® CONTROLLER - STANDARD FEATURES:
- User-friendly design
- Intuitive conversational programming
- Features: Rigid Tapping / Threading / Constant Surface Speed
- Usable G-Code Memory: PathPilot Controller: 80 GB / PathPilot OperatorConsole: 40 GB
- Built-in Dropbox™ support for seamlessly transferring programs

TECHNICAL SPECIFICATIONS

Spindle

Spindle Power:1.5 hp (1.11 kW)

Spindle Speed: 180 to 5,000 rpm

Through Spindle Bore: 1 in.(26 mm)

Spindle Nose: 5C

Control

Standard Feature: Rigid Tapping

Standard Feature: Single Point Threading

Tail Stock

Taper: MT2

Diameter: 0.9 in.(22 mm)

Travel: 2.2 in.(55 mm)

Travels

X-Axis: 4.5 in.(114 mm)

Z-Axis: 10 in.(254 mm) with tailstock

Motion

X- and Z-Axis Maximum Feed Rate: 150 IPM (3.8 m/min)

Axis Drivers (X ,Z): High-Performance, Polyphase Stepper, Motors with Leadshine®, Microstepping Drivers

Power

Power Requirements: Single-Phase 115 Vac, 50/60 Hz, 15A breaker

Machine Specifications

Table Length × Width: 7.5 in. × 4 in.(191 mm × 102 mm)

Machine Footprint: 50in. x 26in.(1.2m x .7m)

Typical System Weight: 838 lb.(380 kg)

Maximum Swing Over Bed: 8 in.(200 mm)

Maximum Swing Over Carriage: 4 in.(100 mm)

Overall System Height: 52 in.(1.3 m)

Accessories

Available Accessories:

  • Quick Change Tool Post (Standard)
  • Full Enclosure (Standard)

PATHPILOT® Controller

Features:

  • User-friendly design
  • Support for up to four axis continuous machining
  • Intuitive conversational programming
  • Usable G-Code Memory: Brix Controller: 80 GB / PathPilot OperatorConsole: 40 GB
  • Built-in Dropbox™ support for seamlessly transferring programs

Warranty

1 Year Warranty against defects in material and workmanship. Extended Warranty available.