AF50 BANDSAW PACKAGE OPTIONS
AF50 BANDSAW PREMIUM PACKAGE
Not sure if a bandsaw is right for your workflow?Schedule a Pre-Sales Consultation
NEVER WORRY ABOUT BABYSITTING A BANDSAW AGAIN.
If you own a manual or semi-automatic bandsaw, the AF50 Automatic Feed bandsaw from Tormach might throw you for a loop (in a good way). Since it’s programmable, you can liberate yourself for more productive things while it’s plowing through uncut stock.
You’ll be free to be more efficient and creative. Go work on your business or finalize those designs. The AF50 Automatic Feed bandsaw enables you to automate those tedious, time-consuming manual cuts and removes your need to always be there.
THIS BANDSAW WILL PAY FOR ITSELF
Automatic bandsaws pay for themselves over time because operators don’t have to stand close by, initiating the cuts. Time is money, after all. And the fact that the AF50 is priced under $4,000 and requires limited operator intervention? Your resturn on investment could be only months away. And if you’ve been buying your stock pre-cut, the payback will be especially noticeable.
If you’ve been buying your stock pre-cut, the payback will be especially noticeable.
GET FAST ROI WITH THE AF50 AUTOMATIC FEED BANDSAW
Cutting your stock reduces makes your bottom line better. But automating those cuts? Running just one hour a day, five days a week, this bandsaw can pay for itself in just 4 months!
WHY YOU NEED AN AF50 BANDSAW.
HARNESS THE EXCITING POWER OF BOREDOM!
Isn’t prepared stock something you’d love to take for granted? It might take a day or two to adjust to doing fewer things, but soon enough, you’ll take for granted just how easy it is to take for granted. Think you’re up to that? With a pneumatic clamping system with an adjustable soft squeeze, you’ll be able to cut anything from delicate thin-walled tubing all the way to 7 inch steel round bars. Set it up and forget about it for a while. Sounds like an amazing trip to Dullsville, right?
A BUILT-IN BFF FOR YOUR MILLS AND LATHES.
And who doesn’t like a work pal? Your CNC equipment will love your AF50. A mill or lathe without stock to cut is lonely indeed.
|Table Height:||21.75 in. / 552 mm|
|Length:||50 in. / 1270 mm|
|Width:||36 in. / 914 mm|
|Height with Saw at Rest:||36 in. / 914 mm|
|Height with Saw Vertical:||67 in. / 1702 mm|
|Motor Power:||1 hp / 0.75 kW|
|7 in (178 mm) Round / 6 in x 8 in (152 mm x 203 mm) Flat at 90 degrees|
|135-161-226-394 FPM (@ 60 hz)
41-49-69-120 MPM (@ 60 hz)
|93 in x 0.75 in x 0.035 in. / 2362 mm x 19 mm x 0.9 mm|
LOOKING FOR HELP WITH YOUR AF50 BANDSAW?
Visit the Tormach Support Site to find Manuals, Technical Documents, Datasheets, Service Bulletins,The Knowledge Base and Troubleshooting Guides.
Visit Our Support Section