Tormach will be closed Thursday, November 26 and Friday, November 27 in celebration of Thanksgiving. We will re-open on Monday, November 30 at 8 a.m. CST.


PCNC 440 Main image

Entry Package
For PCNC 440

Tormach’s PCNC 440 Entry Package is the foundation that you will need to get started. This package includes mill, controller, and owners kit.

Starting At: $5,390

(+ Shipping Fee)

Finance for 60 mo. from less than $99/mo. with Geneva Capital

Starter Package
For PCNC 440

The Starter Package for the PCNC 440 builds on the basics of the Entry Package by adding on a mill stand, tooling, vise and PathPilot console.

Starting At: $7,196

(+ Shipping Fee)

Finance for 60 mo. from less than $135/mo. with Geneva Capita

Premium Package
For PCNC 440

Take the PCNC 440 Starter Package, then move on up with the convenience of a power drawbar and the safety and cleanliness of an enclosure. It’s the PCNC 440 Standard Package

Starting At: $11,310

(+ Shipping Fee)

Finance for 60 mo. from less than $215/mo. with Geneva Capital

Premium Package
With ATC

The PCNC 440 Premium Package build on the Standard Package by boosting performance with an automatic tool changer, digitizing probe, and electronic tool setter, you’ll be CNC milling in style with your very own PCNC 440.

Starting At: $15,764

(+ Shipping Fee)

Finance for 60 mo. from less than $310/mo. with Geneva Capital

Not sure which machine is right for you?

Schedule a Pre-Sales Consultation


A benchtop mill that fits all-around capability in a small and affordable package, the PCNC 440 makes it possible for more spaces to become machine shops.


  • Cast Iron Frame and Table

  • Dovetail Ways

  • Ball Screws

  • 10,000 RPM R8 Spindle

  • 10” x 6.25” x 10” Work Envelope

Introducing the Tormach PCNC 440

Tormach's latest addition to the PCNC family, the PCNC 440. As we strive to grow Tormach’s culture of enabling ideas, the PCNC 440 was a natural next step.



As the nerve center of Tormach machine tools, PathPilot® runs the show and supports simultaneous motion up to 4 axes. Intuitive and powerful conversational programming is baked right in and lets you create programs at the machine — even if you don’t know G-code or CAM!

PathPilot is the easier-to-learn and easier-to-use CNC controller, and includes features that make life a little easier like free network support and 1,000-block look-ahead. Plus, any feature that’s available in PathPilot is included. We think it’s ridiculous to lock features behind some mystery paywall. This feature alone can add thousands of dollars in value when purchasing a Tormach.

We’re proud to offer PathPilot HUB, a full-featured, web-based version of PathPilot. When you sign up (for free), you have access to PathPilot HUB. It’s perfect for CNC education, taking Tormach for a test drive, or for creating usable G-Code when you’re away from your shop. If your machine has available WiFi, you can even upload that G-Code remotely.

Technical Specifications


X-Axis: 10 in. 254 mm
Y-Axis: 6.25 in. 158.75 mm
Z-Axis: 10 in. 254 mm


Spindle Power: 0.75 hp / 0.56 kW
Maximum Speed: 10.000 RPM
Transmission: Poly-V belt
Spindle Taper: R8
Tapping: Thread Mill

Maximum Feed Rate

X- and Y-Axis: 135 IPM 3.43 m/min
Z-Axis: 110 IPM 2.79 m/min


Power Required: Single-Phase, 115 Vac 50/60Hz, 15A Breaker

Machine Dimensions

Table Size: 18 in × 6.30 in. / 458 mm x 160 mm
Table Slots: 3/8 in. (three slots) / 9.5 mm – Three slots
Spindle Nose to Table Max Clearance: 11 in. / 279 mm
Spindle Centerline to Machine Column: 6.5 in. / 165 mm
Typical System Footprint: 42 in × 36 in. / 1067 mm x 914 mm
Overall System Height: 72 in. / 1829 mm
Typical System Weight: 600 lb / 272 kg

PATHPILOT® Controller

Easy to learn, touch screen friendly user interface

Support for up to four axis continuous machining

Intuitive conversational programming

Built-in recommended speeds and feeds calculator

80GB program memory

Built-in Dropbox support for seamlessly transferring programs


Full Enclosure Kit for PCNC 440

  • 10 ga. Sheet Metal Construction
  • 1/4″ Thick Polycarbonate Doors (Compare to Lexan)
  • Powder Coated Finish
  • Dual Pivoting Front Doors.  Opening is 23″ x 24″ (W x H)
  • Sliding Side Doors.  Opening is 14″ x 20″ (W x H)
  • Flat Packed, Some Assembly Required.

Power Drawbar for PCNC 440

Eliminate the need to hand-tighten your drawbar and install this Power Draw Bar on your PCNC 440 for lightning-fast tool changes with the push of a button.

The power drawbar is designed for use with the Tormach Tooling System (TTS), but easily pivots away to allow manual tightening of the drawbar if necessary for conventional R8 tooling.

  • Requires 90 psi Air Supply (FRL unit recommended)
  • Designed for use with Tormach Tooling System (TTS) toolholders
  • Multi-stack air-over-air pneumatic cylinder ram actuation
  • Does not load the Spindle Bearings
  • Easily Pivots for Manual drawbar tightening for R8 tooling

The Power Drawbar kit includes pneumatic cylinder assembly stack, drawbar, pneumatic push-button box, and all necessary pneumatic tubing.

Deluxe CNC Mill Stand

  • Powder Coated Sheet metal Construction
  • Front Storage Compartment with Shelf.  Opening is 25" x 22" (W x H)
  • Adjustable Leveling Feet
  • Flat Packed, Some Assembly Required

Flood Coolant Kit

  • Coolant reservoir tank
  • Coolant Pump
  • Hose Kit, including necessary fittings and mounting brackets.

Automatic Tool Changer for PCNC 440

  • 8 Station Tool Tray for TTS Tool Holders*
  • Slide activation via Double Acting Pneumatic Cylinder with Cushion
  • Automatic Crash Detection and Warning Prompts
  • Carousel Position Feedback
  • Air Blast
  • Integrates with PathPilot® with graphical interface


When will additional accessories be available?

Power Drawbar:

Now Available! Click here to buy now.


Now Available! Click here to buy now.

4th Axis:

Now Available! click here to buy now.

Can I customize my package?

To purchase a custom package, use the PCNC 440 “Build Your Own” Package. This package can be modified to meet your specific needs. Items can be added and subtracted from the package, as you see fit.

What control system is used to run the PCNC 440?

The PCNC 440 is controlled by PathPilot™, Tormach’s control system, used on every PCNC mill. PathPilot™ easily interfaces with most popular CAD/CAM systems but includes onboard conversational programming that can create CNC programs at the machine without the need for a CAD/CAM system.

What accessories are compatible with this machine?

Many accessories that are available for our two larger mills (PCNC 1100 & PCNC 770) are compatible with the PCNC 440, as well. Like our other mills, the PCNC 440 utilizes our TTS tooling system. Some exclusions are the larger vises, high speed spindle attachments, current 4th axis tables, tool setter, load meter, automatic oiler, and active/digital probes (probes may be available in the future).

What materials can the PCNC 440 cut?

It can cut aluminum, steel, titanium, as well as plastics, composites, wood, and PCB boards. Anything our other mills can cut.

What are the dimensions/footprint of the PCNC 440?

The PCNC 440 has a footprint of 40” x 32” x 42” (X x Y x Z) – this is not including the stand (full enclosure does not change the footprint).

Looking For Help With Your Pcnc 440 Mill?

Visit the Tormach Support Site to find Manuals, Technical Documents, Datasheets, Service Bulletins,The Knowledge Base and Troubleshooting Guides.

Get Help With Your PCNC 440

PCNC 440