JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

Home
Site Map

Site Map

Pages

Categories

Products

#
- #0-6 Tap Collet
- #1 Turning and Facing Toolholder for Quick Change Post (Size CXA)
- #1 x 2-5/8 in. x 3-7/8 in. 10-Pack Drills
- #1-#56 Jobber Length Drill Set (Wire Gauge)
- #10 x 1/2 in. x 1/4 in. Thread Mill
- #10, 3/16 in. Tap Collet
- #12 x 5/8 in. x 1/4 in. Thread Mill
- #12, 7/32 in. Tap Collet
- #13 x 2-5/16 in. x 3-1/2 in. 10-Pack Drills
- #19 x 2-1/8 in. x 3-1/4 in. 10-Pack Drills
- #1X Extended Reach Turning & Facing Toolholder for QC Post (Size CXA)
- #2 Turning & Boring Toolholder for Quick Change Post (Size CXA)
- #34 x 1-1/2 in. x 2-5/8 in. 10-Pack Drills
- #36 x 13/16 in. x 1-13/16 in. 10-Pack Drills
- #4 Boring Bar Holder for Quick Change Post (Size CXA)
- #4 x 2-1/2 in. x 3-3/4 in. 10-Pack Drills
- #48 x 1 in. x 2 in. 10-Pack Drills
- #5 x 2-1/2 in. x 3-3/4 in. 10-Pack Drills
- #50 x 11/16 in. x 1-11/16 in. 10-Pack Drills
- #8 x 1/2 in. x 1/4 in. Thread Mill
- #8, 5/32 in. Tap Collet
0
- 0.0005 in. Dial Indicator
- 0.061-0.250 in. Pin Gauge Set (MINUS, 190 Pcs.)
- 0.251-0.500 in. Pin Gauge Set (MINUS, 250 Pcs.)
- 0XA Tool Holder Kit for 8L
- 0XA Tool Holder Kit for RapidTurn Deluxe Package
- 0XA Tool Holder Starter Kit for RapidTurn
1
- 1 Position Gang Block
- 1-2-3 Block Set
- 1.1 mm x 12 mm x 34 mm 10-Pack Drills
- 1.2 mm x 16 mm x 38 mm 10-Pack Drills
- 1.3 mm x 16 mm x 38 mm 10-Pack Drills
- 1.4 mm x 18 mm x 40 mm 10-Pack Drills
- 1.5 in. Spoilboard Surfacing Tool
- 1.7 mm x 20 mm x 43 mm 10-Pack Drills
- 1.8 mm x 22 mm x 46 mm 10-Pack Drills
- 1.9 mm x 22 mm x 46 mm 10-Pack Drills
- 1/16 in. - 1/2 in. Jobber Length Drill Set (by 64ths)
- 1/16 in. - 1/2 in. Machine Length Drill Set
- 1/16 in. x 1/8 in. x 1/8 in. x 1-1/2 in.
- 1/2 IN, LH, Turning and Facing Holder for 15L lathe
- 1/2 in. -90° Drills
- 1/2 in. Shank Edge Finder
- 1/2 in. Wye fitting for Flood Coolant Kit (1/8 HP)
- 1/2 in. x 1-1/4 in. x 1/2 in. Thread Mill
- 1/2 in. x 1/2 in. x 1 in. x 3 in.
- 1/2 in. x 1/2 in. x 1 in. x 3 in.
- 1/2 in. x 1/2 in. x 1 in. x 3 in.
- 1/2 in. x 1/2 in. x 1 in. x 3 in.
- 1/2 in. x 1/2 in. x 1 in. x 3 in. x R.120 in.
- 1/2 in. x 1/2 in. x 1 in. x 4 in.
- 1/2 in. x 1/2 in. x 1-1/4 in. x 2-3/4 in.
- 1/2 in. x 1/2 in. x 1-1/4 in. x 3 in.
- 1/2 in. x 1/2 in. x 5/8 in. x 3 in.
- 1/2 in. x 1/2 in. x 5/8 in. x 3 in.
- 1/2 in. x 1/2 in.x 1 in. x 3 in.
- 1/2 in.- 13, H5 Tap
- 1/2-13 Flanged Nut
- 1/4 in. - 20 Tap
- 1/4 in. - 20 Tap
- 1/4 in. - 20, H3 Tap
- 1/4 in. - 28 Tap
- 1/4 in. -90° Drills
- 1/4 in. Coolant Hose Accessory Kit w/Pliers
- 1/4 in. Coolant Hose Pliers
- 1/4 in. Coolant Hose to 1/4 in. NPT Connector (5 PC)
- 1/4 in. Coolant Hose Upgrade Kit for Tormach
- 1/4 in. Coolant Hose, 6 in. Segment (2 PC)
- 1/4 in. x 1/4 in. x 3/4 in. x 2-1/2 in.
- 1/4 in. x 1/4 in. x 3/4 in. x 2-1/2 in.
- 1/4 in. x 1/4 in. x 3/4 in. x 2-1/2 in.
- 1/4 in. x 1/4 in. x 3/4 in. x 2-1/2 in.
- 1/4 in. x 1/4 in. x 5/8 in. x 2 in.
- 1/4 in. x 1/4 in. x 5/8 in. x 2-1/2 in.
- 1/4 in. x 1/4 in. x 5/8 in. x 2-1/2 in.
- 1/4 in. x 1/4 in. x 5/8 in. x 2-1/2 in.
- 1/4 in. x 1/4 in. x 5/8 in. x 2-1/2 in. x R.030 in.
- 1/4 in. x 1/4 in. x 7/16 in. x 2-1/2 in.
- 1/4 in. x 3/8 in. x 5/8 in. x 3-3/8 in.
- 1/4 in. x 3/8 in. x 5/8 in. x 3-3/8 in.
- 1/4 in.- 28 Tap
- 1/4 x 3/4 in. x 3/16 in. Thread Mill
- 1/8 in. -90° Drills
- 1/8 in. x 1/8 in. x 1/2 in. x 1-1/2 in.
- 1/8 in. x 1/8 in. x 1/2 in. x 1-1/2 in.
- 1/8 in. x 1/8 in. x 1/2 in. x 1-1/2 in.
- 1/8 in. x 1/8 in. x 1/2 in. x 1-1/2 in.
- 1/8 in. x 1/8 in. x 1/2 in. x 1-1/2 in.
- 1/8 in. x 1/8 in. x 3/8 in. x 1-1/2 in.
- 1/8 in. x 1/8 in. x 3/8 in. x 1-1/2 in.
- 1/8 in. x 3/8 in. x 3/8 in. x 3-1/16 in.
- 1/8 in. x 7/8 in. x 1-7/8 in. 10-Pack Drills
- 10 - 24, H3 Tap
- 10-24 Tap
- 10-24 Tap
- 10-24, H3 Tap
- 10-32 Tap
- 10-32 Tap
- 10-32, H3 Tap
- 10-Pocket Automatic Tool Changer for the 770M
- 10-Pocket Automatic Tool Changer for the 770MX (BT30)
- 10-Pocket Automatic Tool Changer Kit for PCNC 770 Series 3
- 10.1 mm x 87 mm x 133 mm 5-Pack Drills
- 10.2 mm x 87 mm x 133 mm 5-Pack Drills
- 10.3 mm x 87 mm x 133 mm 5-Pack Drills
- 10.4 mm x 87 mm x 133 mm 5-Pack Drills
- 10.6 mm x 87 mm x 133 mm 5-Pack Drills
- 10.7 mm x 94 mm x 142 mm 5-Pack Drills
- 10.8 mm x 94 mm x 142 mm 5-Pack Drills
- 10.9 mm x 94 mm x 142 mm 5-Pack Drills
- 11.0 mm x 94 mm x 142 mm 5-Pack Drills
- 11.1 mm x 94 mm x 142 mm 5-Pack Drills
- 11.2 mm x 94 mm x 142 mm 5-Pack Drills
- 11.3 mm x 94 mm x 142 mm 5-Pack Drills
- 11.4 mm x 94 mm x 142 mm 5-Pack Drills
- 11.5 mm x 94 mm x 142 mm 5-Pack Drills
- 11.6 mm x 94 mm x 142 mm 5-Pack Drills
- 11.7 mm x 94 mm x 142 mm 5-Pack Drills
- 11.8 mm x 94 mm x 142 mm 5-Pack Drills
- 11.9 mm x 101 mm x 151 mm 5-Pack Drills
- 11/32 in. x 3-7/16 in. x 4-3/4 in. 5-Pack Drills
- 11/32 in. x 3/8 in. x 13/16 in. x 2-1/2 in.
- 1100 Basic Fixture Accessory Kit
- 1100 Mill Angular Contact Bearing
- 1100 Y-Axis Way Cover / Bellow Cover
- 1100 Z-Axis Way Cover / Bellow Cover
- 1100M / 1100MX Stand
- 1100M / 1100MX Stand Bundle
- 1100M Advanced EDU Bundle
- 1100M Backsplash Kit
- 1100M Basic EDU Bundle
- 1100M Chip Tray
- 1100M Enclosure Kit
- 1100M Entry Package
- 1100M Extended Warranty
- 1100M High-Speed Spindle Programming Kit
- 1100M Intermediate EDU Bundle
- 1100M Premium Package
- 1100M Printed Manual
- 1100M RapidTurn Programming Kit (For use with Ser# MA10325 - MA10629)
- 1100M Spindle Drive Belt
- 1100M Standard Package
- 1100M Starter Package
- 1100M-RapidTurn Programming Kit (For use with Ser#MA10324 and below)
- 1100M/M+/MX PathPilot Operator Console
- 1100M/MX Y-Axis Ball Screw and Nut
- 1100MX Advanced EDU Bundle
- 1100MX Basic EDU Bundle
- 1100MX Chip Tray
- 1100MX Extended Warranty
- 1100MX Premium Package
- 1100MX Printed Manual
- 1100MX Spindle Cartridge (BT30)
- 1100MX Spindle Drive Belt
- 1100MX Standard Package
- 11ELA60 Threading Insert (OD) LH 10-pack
- 11ERA60 Threading Insert (OD) RH 10-Pack
- 11ILA60 Threading Insert (ID) 10-Pack
- 11IRA60 Threading Insert 10-Pack
- 12 mm T-Slot Nut
- 12-24 Tap
- 12-28 Tap
- 12-Pocket Automatic Tool Changer Kit for PCNC 1100 Series 3
- 12-Pocket Automatic Tool Changer for the 1100M
- 12-Pocket Automatic Tool Changer for the 1100MX (BT30)
- 12.1 mm x 101 mm x 151 mm 5-Pack Drills
- 12.2 mm x 101 mm x 151 mm 5-Pack Drills
- 12.3 mm x 101 mm x 151 mm 5-Pack Drills
- 12.4 mm x 101 mm x 151 mm 5-Pack Drills
- 12.5 mm x 101 mm x 151 mm 5-Pack Drills
- 12.6 mm x 101 mm x 151 mm 5-Pack Drills
- 12.7 mm x 101 mm x 151 mm 5-Pack Drills
- 12.8 mm x 101 mm x 151 mm 5-Pack Drills
- 12.9 mm x 101 mm x 151 mm 5-Pack Drills
- 120 mm Toolmaker Vise, Screwless
- 120° Replacement Diamond Drag Engraver Bit
- 13.0 mm x 101 mm x 151 mm 5-Pack Drills
- 13/32 in. x 3-7/8 in. x 5-1/4 in. 5-Pack Drills
- 13/32 in.x 7/16 in. x 7/8 in. x 2-3/4 in.
- 1300PL Advanced EDU Bundle
- 1300PL Basic EDU Bundle
- 1300PL Entry Package
- 1300PL Intermediate EDU Bundle
- 1300PL Plasma Table Extended Warranty
- 1300PL Printed Manual
- 1300PL Standard Package
- 15/32 in. x 4-5/16 in. x 5-3/4 in. 5-Pack Drills
- 15/32 in.x 1/2 in. x 1 in. x 3 in.
- 1500MX Basic Fixture Accessory Kit
- 1500MX CNC Mill Configurator
- 1500MX Extended Warranty
- 1500MX Flood Coolant Kit
- 1500MX Machine Way Oil (Citgo EP Compound 220), 1 GAL
- 1500MX Replacement Washdown Gun Kit
- 1500MX SMW 4140 Steel Tooling Plate Bundle
- 1500MX SMW Aluminum, Black Anodized 7075 Tooling Plate Bundle
- 1500MX Spindle Cartridge Assembly (BT30)
- 15L Advanced EDU Bundle
- 15L Basic EDU Bundle
- 15L Intermediate EDU Bundle
- 15L Manual 5C Drawtube
- 15L Printed Manual
- 15L Slant-PRO Automation Package
- 15L Slant-PRO Extended Warranty
- 15L Slant-PRO Small Spares Kit
- 15L Slant-Pro Spindle Encoder / Cable
- 15L Slant-PRO Starter Package
- 15L Slant-PRO Turret Package
- 15L Way Wiper
- 15L Z-Axis Ball Screw Angular Contact Bearing [pair]
- 16-Pocket Automatic Tool Changer for the 1500MX
- 16ELAG60 Threading Insert (OD) 10-Pack
- 16ERAG60 Threading Insert (OD) 10-Pack
- 16ILAG60 Threading Insert (ID) 10-Pack
- 16IRAG60 Threading Insert (ID) 10-Pack
- 16oz Travel Mug, Charcoal, Matte
- 17 mm/19 mm Wrench
- 18 in. Extended Guard for PCNC 1100
- 19/64 in. x 3-1/16 in. x 4-3/8 in. 10-Pack Drills
2
- 2 FL REG BALL CARB EM TiAlN: 1/8 x 1/8 x 1/2 x 1-1/2
- 2 FL REG BALL CARB EM: 1/4 x 1/4 x 3/4 x 2-1/2
- 2 FL REG CARBIDE BALL ENDMILL: 1/8 x 1/8 x 3/8 x 3
- 2 Flute HSS End Mill Set (5 Pieces)
- 2 Jaw Chuck for 6 in. Table
- 2 mm Straight Probe Tip for Haimer CENTRO
- 2-Piece Vise Alignment Keys with Screws for Legacy 5 in. Machinist Vise
- 2-valve, 24V solenoid valve kit to control air knives, blow off nozzles, with 10mm air line and high CFM
- 2.2 mm x 27 mm x 53 mm 10-Pack Drills
- 2.3 mm x 27 mm x 53 mm 10-Pack Drills
- 2.6 mm x 30 mm x 57 mm 10-Pack Drills
- 2.7 mm x 33 mm x 61 mm 10-Pack Drills
- 2.8 mm x 33 mm x 61 mm 10-Pack Drills
- 2.9 mm x 33 mm x 61 mm 10-Pack Drills
- 20 mm Wrench for TTS™-ER16
- 21/64 in. x 3-5/16 in. x 4-5/8 in. 5-Pack Drills
- 22 in. LCD Widescreen Touch Screen Monitor
- 22 mm Wrench for TTS™-ER20
- 23/64 in. x 1-3/4 in. x 3-1/16 in. 5-Pack Drills
- 23/64 in. x 3-1/2 in. x 4-7/8 in. 5-Pack Drills
- 24R Advanced EDU Bundle
- 24R ATC Upgrade Bundle
- 24R Basic EDU Bundle
- 24R CNC Router Entry Package
- 24R CNC Router Pro Package
- 24R CNC Router Pro Package With ATC
- 24R CNC Router Starter Package
- 24R Extended Warranty
- 24R Grease Nozzle Kit
- 24R Intermediate EDU Bundle
- 24R Printed Manual
- 24R Router PathPilot Operator Console
- 24R Starter Cutting Tool Kit by Amana Tools
- 24VDC Solenoid Kit for 4mm Pneumatic Tubing
- 24VDC Solenoid Kit for 4mm Pneumatic Tubing, includes one 5-way center-exhaust solenoid and one 2/4 solenoid
- 25 mm Wrench for TTS™-ER16
- 2pc Vise Alignment Keys with Screws for 4 in. & 5 in. CNC Vise
3
- 3 FL REG SQUARE CARB EM-1/4 x 1/4 x 3/4 x 2-1/2
- 3 FL REG SQUARE CARB EM: 1/2 x 1/2 x 1-1/4 x 3
- 3 FL REG SQUARE CARB EM: 1/2 x 1/2 x 1-1/4 x 3 x R.030
- 3 FL REG SQUARE CARB EM: 1/8 x 1/8 x 3/8 x 1-1/2
- 3 FL REG SQUARE CARB EM: 3/8 x 3/8 x 1 x 2-1/2
- 3 FL REG SQUARE CARB EM: 3/8 x 3/8 x 1 x 2-1/2 x R.030
- 3 HP VFD for 15L
- 3 Jaw Chuck for 6 in. (152 mm) Table
- 3 Jaw Chuck for 8 in. (200 mm) Table
- 3 mm Collet for Kress
- 3 Position Gang Block
- 3-Jaw Reversible 6 in. Lathe Chuck (D1 Type Direct Mount)
- 3-Piece STFCR Boring Bar Set
- 3.0 mm x 33 mm x 61 mm 10-Pack Drills
- 3.1 mm x 36 mm x 65 mm 10-Pack Drills
- 3.3 mm x 36 mm x 65 mm 10-Pack Drills
- 3.6 mm x 39 mm x 70 mm 10-Pack Drills
- 3.7 mm x 39 mm x 70 mm 10-Pack Drills
- 3.8 mm x 43 mm x 75 mm 10-Pack Drills
- 3.9 mm x 43 mm x 75 mm 10-Pack Drills
- 3/16 in. x 1-1/8 in. x 2-3/16 in. 10-Pack Drills
- 3/16 in. x 3/16 in. x 3/8 in. x 2 in.
- 3/16 in. x 3/16 in. x 3/8 in. x 2 in.
- 3/16 in. x 3/16 in. x 5/8 in. x 2 in.
- 3/16 in. x 3/16 in. x 5/8 in. x 2 in.
- 3/16 in. x 3/16 in. x 5/8 in. x 2 in.
- 3/16 in. x 3/16 in. x 5/8 in. x 2 in.
- 3/16 in. x 3/16 in. x 9/16 in.x 2 in.
- 3/16 in. x 3/8 in. x 1/2 in. x 3-1/4 in.
- 3/16 in. x 3/8 in. x 1/2 in. x 3-1/4 in.
- 3/64 in. x 1/2 in. x 1-3/8 in. 10-Pack Drills
- 3/64 in. x 3/4 in. x 1-3/4 in. 10-Pack Drills
- 3/8 in. - 16 Tap
- 3/8 in. - 24 Tap
- 3/8 in. - 24 Tap
- 3/8 in. -90° Drills
- 3/8 in. Shank Edge Finder
- 3/8 in. T-Slot Nut
- 3/8 in. Tap Collet
- 3/8 in. x 1 in. x 3/8 in. Thread Mill
- 3/8 in. x 3/8 in. x 1 in. x 2-1/2 in.
- 3/8 in. x 3/8 in. x 1 in. x 2-1/2 in.
- 3/8 in. x 3/8 in. x 1 in. x 2-1/2 in.
- 3/8 in. x 3/8 in. x 1 in. x 2-1/2 in.
- 3/8 in. x 3/8 in. x 2 in. x 4 in.
- 3/8 in. x 3/8 in. x 3/4 in. x 3-1/2 in.
- 3/8 in. x 3/8 in. x 3/4 in. x 3-1/2 in.
- 3/8 in. x 3/8 in. x 7/8 in. x 2-1/2 in.
- 3/8 in. x 3/8 in. x 7/8 in. x 2-1/2 in. x R.015 in.
- 3/8 in. x 3/8 in. x 9/16 in. x 2-1/2 in.
- 3/8 in. x 3/8 in. x 9/16 in. x 2-1/2 in.
- 3/8 in.- 16 Tap
- 30 mm Wrench for TTS™-ER20 Nut
- 30° x 1/8 in. x 1-1/2 in.
- 34 mm Toolmaker Vise, Screwless
- 36 in. x 24 in. Satin Tormach Banner with Top Grommets
4
- 4 FL REG SQUARE CARB EM TiAlN: 1/2 x 1/2 x 1 x 3
- 4 FL REG SQUARE CARB EM TiAlN: 1/4 x 1/4 x 3/4 x 2-1/2
- 4 FL REG SQUARE CARB EM TiAlN: 3/8 x 3/8 x 1 x 2-1/2
- 4 FL REG SQUARE CARB EM TiAlN: 3/8 x 3/8 x 1 x 2-1/2 x R.030
- 4 FL REG SQUARE CARB EM TiAlN: 5/16 x 5/16 x 13/16 x 2-1/2
- 4 Flute HSS End Mill Set (5 Pieces)
- 4 in. CNC Vise
- 4 in. Parallel Set
- 4 in. Precision 3-Jaw Chuck (5C Mount)
- 4 in. Precision 4-Jaw Chuck (5C Mount)
- 4 Inch Length Coolant Nozzle for Turret 10-Pack
- 4 Jaw Chuck for 6 in. Table
- 4 Jaw Chuck for 8 in. (200 mm) Table
- 4 mm Collet for Kress
- 4 mm Ferrule for Lubrication System
- 4 mm Nylon Tube for Oiler
- 4 mm Spring Sheath for lubrication system
- 4-40 Spiral Flute HSS Taps Tap
- 4-40 Tap
- 4-40, H2 Tap
- 4-48 Spiral Flute HSS Taps Tap
- 4-Jaw Independent Reversible 6 in. Lathe Chuck (D1 Type Direct Mount)
- 4.2 mm x 43 mm x 75 mm 10-Pack Drills
- 4.3 mm x 47 mm x 80 mm 10-Pack Drills
- 4.4 mm x 47 mm x 80 mm 10-Pack Drills
- 4.6 mm x 47 mm x 80 mm 10-Pack Drills
- 4.7 mm x 47 mm x 80 mm 10-Pack Drills
- 4.8 mm x 52 mm x 86 mm 10-Pack Drills
- 440 Basic Fixture Accessory Kit
- 45 mm Toolmaker Vise, Screwless
- 45° Replacement Drag Knife Blade
- 45° x 1/8 in .x 1-1/2 in.
- 4mm Bonded Pneumatic Duplex Tubing
- 4th Axis Driver and Installation Kit (M/MX)
- 4th Axis Homing Kit
- 4th Axis Integration Kit (PCNC 770/PCNC 1100)
- 4th Axis Mounting Kit for Tombstone
5
- 5 in. (127 mm) CNC Vise
- 5 in. (127 mm) Parallel Set
- 5 in. (127 mm) Pin Jaw Set
- 5 in. Machinist Vise - Precision Angle Lock
- 5 mm Bent Probe Tip for Haimer CENTRO
- 5 mm Straight Probe Tip for Haimer CENTRO
- 5 Piece Lathe Tool Set, 3/8 in. Square Shank
- 5 pin DIN extension cable, 6 ft
- 5 Pk.- U x 3-5/8 in. x 5 in. 5-Pack Drills
- 5-40 Tap
- 5-40 Tap
- 5-44 Tap
- 5-Piece STFCL Boring Bar Set
- 5-Piece STFCR Boring Bar Set
- 5.1 mm x 52 mm x 86 mm 10-Pack Drills
- 5.2 mm x 52 mm x 86 mm 10-Pack Drills
- 5.3 mm x 52 mm x 86 mm 10-Pack Drills
- 5.4 mm x 57 mm x 93 mm 10-Pack Drills
- 5.6 mm x 57 mm x 93 mm 10-Pack Drills
- 5.7 mm x 57 mm x 93 mm 10-Pack Drills
- 5.8 mm x 57 mm x 93 mm 10-Pack Drills
- 5.9 mm x 57 mm x 93 mm 10-Pack Drills
- 5/16 in. - 18 Tap
- 5/16 in. - 18 Tap
- 5/16 in. - 24 Tap
- 5/16 in. x 5/16 in. x 13/16 in. x 2-1/2 in. x R.015 in.
- 5/16 in.- 24 Tap
- 5/16 x 3/4 in. x 5/16 in. Thread Mill
- 5/8 in. T-Slot Nut
- 5/8 in. T-Slot Nut with Locating Pin
- 5/8 in. T-Slot Nut with Locating Pin (Blind)
- 5/8 in. T-Slot Nut with Locating Stop
- 50 mm Toolmaker Sine Vise w/ Screw
- 50 mm Toolmaker Vise w/ Screw
- 5C Adjustable Collet Stop
- 5C Collet - 1 in.
- 5C Collet - 1-3/32 in.
- 5C Collet - 1/16 in.
- 5C Collet - 1/2 in.
- 5C Collet - 1/8 in.
- 5C Collet - 11/32 in.
- 5C Collet - 11/64 in.
- 5C Collet - 13 /16 in.
- 5C Collet - 13/32 in.
- 5C Collet - 15 /16 in.
- 5C Collet - 15/32 in.
- 5C Collet - 21 /32 in.
- 5C Collet - 23 /32 in.
- 5C Collet - 27 /32 in.
- 5C Collet - 29 /32 in.
- 5C Collet - 3/16 in.
- 5C Collet - 3/32 in.
- 5C Collet - 31 /32 in.
- 5C Collet - 31 /64 in.
- 5C Collet - 33 /64 in,
- 5C Collet - 37 /64 in.
- 5C Collet - 43 /64 in.
- 5C Collet - 47 /64 in.
- 5C Collet - 5 /16 in.
- 5C Collet - 5/32 in.
- 5C Collet - 5/64 in.
- 5C Collet - 51 /64 in.
- 5C Collet - 53 /64 in.
- 5C Collet - 59 /64 in.
- 5C Collet - 7 /8 in.
- 5C Collet - 7/16 in.
- 5C Collet - 7/64 in.
- 5C Collet - 9/64 in.
- 5C Collet -13/64 in.
- 5C Collet Block Set
- 5C Collet Fixture for 6 in. Rotary Table
- 5C Collet Fixture for 8 in. Rotary Table
- 5C collet wrench
- 5C Emergency Brass Collet
- 5C Hex Collet - 1/4 in.
- 5C Hex Collet - 1/8 in.
- 5C Hex Collet - 11/16 in.
- 5C Hex Collet - 13/16 in.
- 5C Hex Collet - 3/16 in.
- 5C Hex Collet - 5/16 in.
- 5C Hex Collet - 5/8 in.
- 5C Hex Collet - 7/16 in.
- 5C Hex Collet - 7/8 in.
- 5C Hex Collet - 9/16 in.
- 5C Hex Collet Set (13 Pcs.) - Inch
- 5C Round Collet Set (18 Pcs.) - Inch
- 5C Round Collet Set (35 Pcs.) - Inch
- 5C Round Collet Set (9 pcs.) - Metric
- 5C Serrated Collet Set (5 Pcs.) - Inch
- 5C Spin Indexer Fixture w/Tailstock
- 5C Square Collet Set (11 Pcs.) - Inch
6
- 6 in. CNC Vise - Precision Angle Lock
- 6 in. Face Plate (D1-4 Type Direct Mount)
- 6 in. Lathe Jaw Boring Ring
- 6 in. Motorized Rotary Table
- 6 in. Parallel Set
- 6 in. Soft Jaw Set (2 pack)
- 6 in. Steel Soft Top Jaws (2 in. Tall)
- 6 in. Steel Soft Top Jaws (3 in. Tall)
- 6 in. TalonGrip™ Vise Jaw Systems - Mitee-Bite - Compatible with Tormach 4 in. and 5 in. vises
- 6 in. Tilting Motorized Rotary Table
- 6 in. x 12 in. Magnetic Chuck (Fine Pole)
- 6 mm Collet for Kress
- 6 Piece Quick Change Tool Post Set (Size CXA)
- 6 Port Manifold
- 6-32 Tap
- 6-32 Tap
- 6-32, H3 Tap
- 6-40 Tap
- 6-in. Rotary Table Clamp Kit
- 6.1 mm x 63 mm x 101 mm 10-Pack Drills
- 6.2 mm x 63 mm x 101 mm 10-Pack Drills
- 6.3 mm x 63 mm x 101 mm 10-Pack Drills
- 6.6 mm x 63 mm x 101 mm 10-Pack Drills
- 6.8 mm x 69 mm x 109 mm 10-Pack Drills
- 60° Replacement Drag Knife Blade
- 60° x 1/8 in. x 1-1/2 in.
- 64GB Memory
- 6° Cut-Off Tool holder for Posi-Lock Gang Post
7
- 7 Piece Lathe Tool Set 3/8 in. Square Shank
- 7.1 mm x 69 mm x 109 mm 10-Pack Drills
- 7.2 mm x 69 mm x 109 mm 10-Pack Drills
- 7.3 mm x 69 mm x 109 mm 10-Pack Drills
- 7.4 mm x 69 mm x 109 mm 10-Pack Drills
- 7.5 mm x 69 mm x 109 mm 10-Pack Drills
- 7.6 mm x 75 mm x 117 mm 10-Pack Drills
- 7.7 mm x 75 mm x 117 mm 10-Pack Drills
- 7.8 mm x 75 mm x 117 mm 10-Pack Drills
- 7.9 mm x 75 mm x 117 mm 10-Pack Drills
- 7/16 in. - 14 Tap
- 7/16 in. Tap Collet
- 7/16 in. x 7/16 in. x 1 in. x 2-3/4 in.
- 7/32 in. x 1-1/4 in. x 2-3/8 in. 10-Pack Drills
- 7/32 in. x 2-1/2 in. x 3-3/4 in. 10-Pack Drills
- 7/64 in. x 1-1/2 in. x 2-5/8 in.10-Pack Drills
- 70 mm Toolmaker Vise, Screwless
- 770 Basic Fixture Accessory Kit
- 770 Mills Angular Contact Bearing
- 770 Y-Axis Front Way / Bellow Cover Cover
- 770 Y-Axis Rear Way Cover / Bellow Cover
- 770 Z-Axis Way Cover / Bellow Cover
- 770M / 770MX Stand Bundle
- 770M Advanced EDU Bundle
- 770M Backsplash Kit
- 770M Basic EDU Bundle
- 770M Chip Tray
- 770M Enclosure Kit
- 770M Entry Package
- 770M Extended Warranty
- 770M Intermediate EDU Bundle
- 770M Mill Printed Manual
- 770M or PCNC 770 Moving Kit
- 770M Premium Package
- 770M Spindle Cartridge
- 770M Standard Package
- 770M Starter Package
- 770M/M+/MX PathPilot Operator Console
- 770MX / 770M Stand
- 770MX Advanced EDU Bundle
- 770MX Basic EDU Bundle
- 770MX Chip Tray
- 770MX Extended Warranty
- 770MX Premium Package
- 770MX Printed Manual
- 770MX Spindle Cartridge (BT30)
- 770MX Standard Package
8
- 8 in. Digital Height Gauge
- 8 Inch Length Coolant Nozzle With Screw-Lock Ball Replacement for Turret 10-Pack
- 8 mm Collet for Kress
- 8 mm Nylon Tube
- 8-32 Tap
- 8-32 Tap
- 8-32, H3 Tap
- 8-36 Tap
- 8-in. Rotary Table Clamp Kit
- 8-Piece STFCR Stub Boring Bar Set
- 8-Pocket Automatic Tool Changer for PCNC 440
- 8.1 mm x 75 mm x 117 mm 10-Pack Drills
- 8.2 mm x 75 mm x 117 mm 10-Pack Drills
- 8.3 mm x 75 mm x 117 mm 10-Pack Drills
- 8.4 mm x 75 mm x 117 mm 5-Pack Drills
- 8.5 mm x 75 mm x 117 mm 5-Pack Drills
- 8.6 mm x 81 mm x 125 mm 5-Pack Drills
- 8.8 mm x 81 mm x 125 mm 5-Pack Drills
- 8.9 mm x 81 mm x 125 mm 5-Pack Drills
- 8L Advanced EDU Bundle
- 8L Basic EDU Bundle
- 8L CNC Lathe Extended Warranty
- 8L Deluxe Package
- 8L Desktop Coolant Kit
- 8L Entry Package
- 8L Lathe PathPilot Operator Console
- 8L Lathe Stand
- 8L Machine Stand Coolant kit
- 8L Premium Package
- 8L Printed Manual
- 8L Spindle Motor Belt
9
- 9 Inch Length Coolant Nozzle for Turret 10-Pack
- 9.1 mm x 81 mm x 125 mm 5-Pack Drills
- 9.2 mm x 81 mm x 125 mm 5-Pack Drills
- 9.3 mm x 81 mm x 125 mm 5-Pack Drills
- 9.4 mm x 81 mm x 125 mm 5-Pack Drills
- 9.6 mm x 87 mm x 133 mm 5-Pack Drills
- 9.7 mm x 87 mm x 133 mm 5-Pack Drills
- 9.8 mm x 87 mm x 133 mm 5-Pack Drills
- 9.9 mm x 87 mm x 133 mm 5-Pack Drills
- 9/32 in. x 2-15/16 in. x 4-1/4 in. 10-Pack Drills
- 9/32 in.x 5/16 in. x 5/8 in. x 2-1/2 in.
- 90 Degree Elbow for 1/4 in. Coolant Hose (5 PC)
- 90 Degree Nozzle for 1/4 in. Coolant Hose (4 PC)
- 90 mm Toolmaker Vise, Screwless
- 90° Replacement Diamond Drag Engraver Bit
- 90° V-Block / Clamp Set, Matched Pair
- 90° x 1/8 in. x 1-1/2 in.
A
- A x 2-5/ in. x 3-7/8 in.10-Pack Drills
- A-Z Jobber Length Drill Set
- AC Bearing Service Tool Kit
- AC Power Outlet
- AC/DC Bus S3
- Active Probe Kit
- ADEH 431 (Shear-Hog) Insert 10-Pack
- ADEH 432 (Shear-Hog) Insert 10-Pack
- ADEH 434 (Shear-Hog) Insert 10-Pack
- Adjustable Parallel Set
- Adjustable Pin Spanner Wrench
- Adjustable Tailstock (Medium)
- Adjustable Tailstock (Tall)
- AE16 Shim Seat
- AF50 24V Solenoid
- AF50 Blade Guide Bearing
- AF50 Printed Manual
- AF50 Proximity Sensor
- AF50+ Bandsaw
- AF50+ EDU Bundle
- AF50+ Premium Package
- AI16 Shim Seat
- Air Edger
- Air Pressure Sensor for the PCNC 770 and PCNC 1100 ATC
- Alignment bushing for PCNC 1100, PCNC 770, 1100M, and 770M drawbar
- Alignment Washer for PCNC 1100 Drawbar
- All-Angle V-Block / Clamp Set
- Aluminum Blank Plate for Modular Vacuum Chuck
- Aluminum Fixture Plate, 18 in. x 8 in. x 10 mm
- Aluminum Fixture Plate, 20 in. x 9.5 in. x 10 mm
- Anti-Fatigue Tormach Logo Mat
- Anti-seize
- Aspire
- ATC Alignment Tool, TTS
- ATC control board (V2.3) for M / MX and 440 Series 3- Programmed
- ATC Cylinder Sensor Module
- ATC Fork (Steel)
- ATC Fork for M and PCNC 440 Mills (plastic)
- ATC Fork for MX Mills (BT30)
- ATC Fork Spring (plastic)
- ATC Index Sensor
- ATC Pressure Sensor
- ATC Reference Tray Sensor Module
- ATC Tray sensor for 770M / MX, 1100M / MX, and PCNC 440
- Automatic Chip Tray Washdown Bar Kit
- Automatic Collet Closer for 15L Slant-PRO
- Automatic Oiler (115V) for PCNC 770 / PSG 612
- Automatic Oiler Kit (115V) for 770M / 770MX
- Automatic Oiler Kit (230V) for 1100M / 1100MX
- Automatic Oiler Kit (230V) for PCNC 1100 / 15L
B
- B x 2-3/4 in. x 4 in. 10-Pack Drills
- Bag of 20 Nylon Hex Bolts
- Ball Precision Cutter - 8 mm
- Basic 3 Piece Indicator Set
- Bearing, Z axis ballscrew mount LH [each]
- Belt, RapidTurn
- Belt: 15L Slant-PRO Lathe Spindle Encoder
- Belt: 15L Slant-PRO Lathe Spindle Motor
- Belt: 15L Slant-PRO Lathe X-axis
- Belt: 15L Slant-PRO Lathe Z-axis
- Belt: PCNC 440 Spindle
- Belt: PSG 612 Surface Grinder X-axis
- Blade Brush for AF50
- Blade Serpent Snakebite Metalworking Blade Coolant
- Blow-off Nozzle
- Boring Bar Holder (Size 0XA)
- Boring Bar Holder for Turret
- Boring Bar Holder for Turret (Unfinished Bore)
- Boring Bar Set
- Boring Head 7/8 in. x 20
- Braking Resistor
- Braking Resistor
- BT30 Operator's Kit (Inch)
- BT30 Operator's Kit (Metric)
- BT30 Power Drawbar Kit
- BT30 Tool Holder, Drill Chuck 8mm, 80mm
- BT30 Tool Holder, End Mill 1/2 in, 50mm
- BT30 Tool Holder, End Mill 1/4 in, 50mm
- BT30 Tool Holder, End Mill 1/8 in, 50mm
- BT30 Tool Holder, End Mill 10mm, 50mm Gage Length
- BT30 Tool Holder, End Mill 3/8 in, 50mm
- BT30 Tool Holder, End Mill 6mm, 50mm Gage Length
- BT30 Tool Holder, ER16, 60mm Gage Length
- BT30 Tool Holder, ER16M (Mini-Nut), 60mm Gage Length
- BT30 Tool Holder, ER20, 48mm Guage Length
- BT30 Tool Holder, ER20, 60mm Gage Length
- BT30 Tool Holder, ER20M (Mini-Nut), 60mm Gage Length
- BT30 Tool Holder, ER32, 60mm Gage Length
- BT30 Tool Holder, Face Mill Arbor 1/2 in, 35mm
- BT30 Tool Holder, Modular, M10, 100mm
- BT30 Tool Holder, Modular, M10, 25mm
- BT30 Tool Holder, Modular, M10, 50mm
- BT30 Tool Holder, Modular, M12, 100mm
- BT30 Tool Holder, Modular, M12, 25mm
- BT30 Tool Holder, Modular, M12, 50mm
- BT30 Tool Holder, Modular, M4, 25mm Gage Length
- BT30 Tool Holder, Modular, M6, 25mm
- BT30 Tool Holder, Modular, M6, 50mm
- BT30 Tool Holder, Modular, M6, 80mm
- BT30 Tool Holder, Modular, M8, 100mm
- BT30 Tool Holder, Modular, M8, 25mm
- BT30 Tool Holder, Modular, M8, 50mm
- BT30 Tool Holder, Probe, 10 mm
- BT30 Tool Holder, Probe, 12mm
- BT30 Tool Holder, Probe, 16mm
- BT30 Tool Holder, Probe, Digitizing
- BT30 Tool Holder, Tapping Head ER16, 110mm Gage Length
- BT30 Tool Holder, Tapping Head ER20, 110mm
- BT30 Tool Setter Calibration Tool
- BT30 Tool Tray Assembly, 12 Tool
- Buck-Boost Transformer
- Bumper
- Bundle 1100M+ Servo Upgrade Kit
- Bundle 770M+ Servo Upgrade Kit
- Bundle BT30 Spindle Upgrade Kit for 1100M+ Mills
- Bundle BT30 Spindle Upgrade Kit for 770M+ Mills
- Bundle High Speed Spindle Kit for PCNC 1100 and 1100M
- Bundle RapidTurn Deluxe Package for 1100M
- Bundle RapidTurn Deluxe Package for 770M, 770MX and 1100MX
- Bundle RapidTurn Deluxe Package for PCNC 1100
- Bundle RapidTurn Deluxe Package for PCNC 770
- Bundle RapidTurn Starter Package for 1100M
- Bundle RapidTurn Starter Package for 770M, 770MX and 1100MX
- Bundle RapidTurn Starter Package for PCNC 1100
- Bundle RapidTurn Starter Package for PCNC 770
- Butyl Tape
C
- C x 2-3/4 in. x 4 in.10-Pack Drills
- Cabinet latch & key
- Cable Kit for Tormach 15L Slant-PRO
- Cable Kit for Tormach PCNC Mills
- Cable Tie Holder, adhesive
- Cable, Ethernet, Cat5e, 10 feet long, 24R
- Cable, Ethernet, Cat6, 20 Ft (6 m)
- Cable, Monitor Power Extension 6 ft (combo male/female end)
- California Air Tools 4610XC Air Compressor
- Camera Flange
- Capacitor
- Carbide Insert - Ball Precision Cutter 16 mm
- Carbide Insert - Ball Precision Cutter 8 mm
- Carbide Insert - Center Cut End Mill 25 mm 10-Pack
- Carbide Insert for Aluminum and Plastic - Center Cut End Mill 17 mm 10-Pack
- Carbide Insert for Aluminum and Plastic - Center Cut End Mill 25 mm 10-Pack
- Carbide Insert for Aluminum and Plastic - Face & End Mills 10-Pack
- Carbide Insert for Aluminum and Plastic - Face Mill/Fly Cutter 10-Pack
- Carbide Insert for Aluminum and Plastic - Toroidal Cutter 16 mm 10-Pack
- Carbide Insert for Steel - Face & End Mills 10-Pack
- Carbide Insert for Steel - Face Mill/Fly Cutter 10-Pack
- Carbide Insert: CCGT 2(1.5)1 for Aluminum (10-Pk)
- Carbide Insert: DCGT 2(1.5)1 10-Pack
- Carbide Insert: DCGT 3(2.5)1 10-Pack
- Carbide Insert: DCMT 3(2.5)1 10-Pack
- Carbide Insert: SCGT 3(2.5)1 10-Pack
- Carbide Insert: SCGT 431 10-Pack
- Carbide Insert: SCMT 3(2.5)1 10-Pack
- Carbide Insert: SCMT 431 10-Pack
- Carbide Insert: VBMT 221 10-Pack
- Carbide Insert: VCGT 221 10-Pack
- CarveSmart Aluminum Soft Jaw Set: 3/4" x 2" x 4.5"
- CarveSmart 1018 Steel Jaw Set with SmartStop 3/4in. x 2in. x 4.5in. - 2pk
- CarveSmart 5+1 in. Master Jaw Set
- CarveSmart 5/16-24 Clamp Assembly
- CarveSmart Aluminum Jaw Set with SmartStop (1 in. x 1.71 in. x 4.5 in.) - 2-Pack
- CarveSmart Aluminum Jaw Set with SmartStop (3/4 in. x 2 in. x 6 in.)
- CarveSmart Cut-to-Length 1018 Steel Jaw Stock (3/4 in. x 2 in. x 31 in.)
- CarveSmart Cut-to-Length Aluminum Jaw Stock (3/4 in. x 2 in. x 31 in.)
- CarveSmart SmartStop 1018 Steel Soft Jaw Set: 3/4" x 2" x 6"
- CarveSmart SmartStop Dowel Pins (Qty 10)
- CCGT 3(2.5)1 Insert 10-Pack
- CCGT 432 Insert 10-Pack
- CCMT 2(1.5)1 Insert for Steel (10-Pk)
- CCMT 3(2.5)1 Insert 10-Pack
- CCMT 431 Insert 10-Pack
- Center Cut End Mill - 17 mm
- Center Cut End Mill - 25 mm
- Check Valve for Coolant Pump
- Chiller Alarm Cable
- Chip Basket for Tormach 15L Slant-PRO
- Chip Guard Shield for RapidTurn
- Circular Connector, Push-Pull Plug, 10 Pin Male, Round, Solder
- Clamp Kit for 3/8 in. T-Slots (58 Pcs.)
- Clamp Kit for 4 Inch CNC Vise
- Clamp Kit for 5 in. CNC Vise
- Clamp Kit for 5/8 in. T-Slots (58 Pcs.)
- Clamp Kit, 6 Inch Vise
- Clamp Screw
- Clamp Screw
- Clamp Screw
- Clamp Screw
- Clamping Unit Installation Tool, BT30
- Clamping Unit, BT30
- CNMG 322 Insert 10-Pack
- CNMG 432 Insert 10-Pack
- Collet Closer Foot Pedal Kit
- Compact TTS™ Tool Tightening Fixture
- Companion Adapter PL Kress
- Connector for 10 mm Flexible Metal Conduit
- Connector for 12 mm Flexible Metal Conduit
- Connector for 16 mm Flexible Metal Conduit - Column End
- Connector for 16 mm Flexible Metal Conduit - Motor End
- Control Contactor 24 VDC..
- Control Relocation Kit
- Controller Arm
- Controller Cable - 10 ft.
- Conversational Programming
- Coolant Filter Assembly for 1500MX
- Coolant Hose Bracket Kit for PCNC 440
- Coolant Hose Bracket Kit: PCNC 1100
- Coolant Hose Bracket Kit: PCNC 770
- Coolant hose mount bracket
- Cooling Fan, 115 VAC
- Coolube 2210, 1 Gallon, w/SDS
- Coordinate Rotation
- Cord, Power 115 VAC 18AWG 6ft
- Coupling - 6 in. Motorized Rotary Table
- Coupling - 8 in. (200 mm) Motorized Rotary Table
- Coupling - X, Y & Z Axis Motor Coupling for PCNC 1100 and 1100M
- Coupling - X, Y & Z Axis Motor Coupling for PCNC 770 770M 770MX
- Cutoff Tool Holder (Size 0XA)
- Cutoff Tool Holder 4 degree mount
- Cutting Tool Starter Set #1
- Cutting Tool Starter Set #2
D
- D x 2-3/4 in. x 4 in. 10-Pack Drills
- D:#1, 3/64 in. x SD:1/8 in. x FL:1/16 in. x OL:1-1/2 in. Drills
- D:#2, 1/16 in. x SD:3/16 in. x FL:5/64 in. x OL:1-3/4 in. Drills
- D:#3, 3/32 in. x SD:1/4 in. x FL:1/8 in. x OL:2 in. Drills
- D:#4, 1/8 in. x SD:5/16 in. x FL:5/32 in. x OL:2-1/4 in. Drills
- D:#5, 3/16 in. x SD:7/16 in. x FL:1/4 in. x OL:2-1/2 in. Drills
- D:#6, 7/32 in. x SD:1/2 in. x FL:7/32 in. x OL:3 in. Drills
- D:1/2 in. x SD:1/2 in. x FL:1 in. x OL:3 in.
- D:1/2 in. x SD:1/2 in. x FL:1-1/4 in. x OL:3 in.
- D:1/2 in. x SD:1/2 in. x FL:13/32 in. x OL:3 in.
- D:1/2 in. x SD:3/8 in. x FL:1 in. x OL:2-11/16 in.
- D:1/4 in. x SD:1/4 in. x FL:1/2 in. x OL:2-1/2 in.
- D:1/4 in. x SD:1/4 in. x FL:1/4 in. x OL:2 in.
- D:1/4 in. x SD:1/4 in. x FL:3/8 in. x OL:4 in.
- D:1/4 in. x SD:1/4 in. x FL:5/8 in. x OL:2-1/2 in.
- D:1/4 in. x SD:1/4 in. x FL:5/8 in. x OL:2-1/4 in.
- D:1/4 in. x SD:3/8 in. x FL:1/2 in. x OL:3-1/8 in.
- D:1/8 in. x SD:1/8 in. x FL:1/4 in. x OL:1-1/2 in.
- D:1/8 in. x SD:1/8 in. x FL:1/8 in. x OL:1-1/2 in.
- D:1/8 in. x SD:1/8 in. x FL:3/8 in. x OL:1-1/2 in.
- D:1/8 in. x SD:1/8 in. x FL:3/8 in. x OL:1-1/2 in.
- D:1/8 in. x SD:3/8 in. x FL:3/8 in. x OL:3-1/16 in.
- D:3/16 in. x SD:1/4 in. x FL:7/16 in. x OL:2 in.
- D:3/16 in. x SD:3/16 in. x FL:7/16 in. x OL:2 in.
- D:3/16 in. x SD:3/16 in. x FL:9/16 in. x OL:2 in.
- D:3/16 in. x SD:3/8 in. x FL:1/2 in. x OL:2-3/8 in.
- D:3/16 in. x SD:3/8 in. x FL:7/16 in. x OL:3-1/8 in.
- D:3/8 in. x SD:3/8 in. x FL:1 in. x OL:2-1/2 in.
- D:3/8 in. x SD:3/8 in. x FL:11/32 in. x OL:3 in.
- DB25 Interface Kit
- DCMT 2(1.5)0 Lathe Insert 10-Pack
- Deluxe Lathe Tool Starter Kit
- Deluxe Professional Lathe Tool Kit
- Dial Test Indicator Kit
- Digital Micrometer (0-1 in.)
- DIJET Insert Wrench: T-06
- DIJET QM Mini Insert Screw Pkg of 1
- DIJET QM Mini Modular Insert High Feed End Mill: 1/2 in.
- DIN Connectors Male
- DIN5 bulkhead connector and J3/J4 connector
- Disc Spring Compression Nut, MX BT30 Spindle
- Disc Spring Guide, MX BT30 Spindle
- Disc Spring, 40mm x 20.4mm x 2.0mm
- Disconnect Switch
- Distribution Plate for Modular Vacuum Chuck
- Door Lock Switch Kit
- Double Fuse Block
- Drawbar for PCNC 440
- Drawbar Wrench/Hammer
- Drawbar, BT30 Spindle
- Drill Chuck - 1/2 in. - JT6
- Drill Chuck - 1/4 in. - JT1
- Drill Chuck - 3/8 in. - JT2
- Dual contactor kit with M12 connector and backing plate
- Dust Collection Kit for 24R CNC Router
- Dust Sealed X/Y/Z Axis Limit Switch
E
- ECM1v1.5 Replacement Kit for 1100M and 770M
- Elbow Fitting: 1/4 in. PTC x 1/4 in. NPT
- Electrical Noise Suppression Kit
- Electrode, Duramax and Duramax Lock, 10-105 A
- Electronic Tool Setter for 24R
- Electronic Tool Setter with Mounting Block
- EMI Filter for PCNC 1100
- EMI Filter for PCNC 1100 Series 3
- EMI Filter for PCNC 770 and 440
- Enclosure Door Switch Kit for PCNC 1100 / PCNC 770
- Enclosure Door Window for PCNC 1100
- Enclosure Door Window for the 1500MX
- Enclosure Left Light Power Cable
- Enclosure Light Window for PCNC 1100
- Enclosure Side Window for PCNC 1100 Mills
- Enclosure Side Window for the 1500MX
- End Mill - 16 mm
- End Mill - 25 mm
- End Mill Grinding Fixture
- End Mill Kit for Aluminum #1
- End Mill, 4 FL BALL, 2 in. OAL, 1/8 in. CD x 1/8 in. SD x 1/2 in. CL, Helix 38-40, Tialn-SH Coated
- End Mill, 4 FL BALL:, 2-1/2 in. OAL, 1/4 in. CD x 1/4 in. SD x 3/4 in. CL, Helix 38-40, Tialn-SH Coated
- End Mill, 4 FL Corner Radius 0.03, 2-1/2 in. OAL, 3/8 in. CD x 3/8 in. SD x 7/8 in. CL, Helix 38-40, ALTIN-H Coated
- End Mill, 4 FL CORNER RADIUS 0.03, 3 in. OAL, 1/2 in. CD x 1/2 in. SD x 1 in. CL, Helix 38-40, ALTIN-H Coated
- End Mill, 4 FL SQUARE, 1-1/2 in. OAL, 1/8 in. CD x 1/8 in. SD x 3/8 in. CL, Helix 38-40, ALTIN-H Coated
- End Mill, 4 FL SQUARE, 2-1/2 in. OAL, 1/4 in. CD x 1/4 in. SD x 1/2 in. CL, Helix 38-40, ALTIN-H Coated
- End Mill, 4 FL SQUARE, 3 in. OAL, 1/2 in. CD x 1/2 in. SD x 1 in. CL, Helix 38-40, ALTIN-H Coated
- End Mill, 4 FL SQUARE:, 2-1/2 in. OAL, 3/8 in. CD x 3/8 in. SD x 7/8 in. CL, Helix 38-40, ALTIN-H Coated
- ER11 Collet Set (7 Pcs.) - Inch
- ER11 Collet Set (7 Pcs.) - Metric
- ER11M Collet Nut
- ER11M Collet Nut Wrench
- ER11M x 3/4 in. Collet Chuck
- ER11M x M8 Modular Collet Chuck
- ER16 Collet - 1 mm
- ER16 Collet - 1.5 mm
- ER16 Collet - 1/16 in.
- ER16 Collet - 1/4 in.
- ER16 Collet - 1/8 in.
- ER16 Collet - 10 mm
- ER16 Collet - 11/32 in.
- ER16 Collet - 11/64 in.
- ER16 Collet - 15/64 in.
- ER16 Collet - 17/64 in.
- ER16 Collet - 19/64 in.
- ER16 Collet - 2.5 mm
- ER16 Collet - 21/64 in.
- ER16 Collet - 23/64"
- ER16 Collet - 3 mm
- ER16 Collet - 3/16 in.
- ER16 Collet - 3/8 in.
- ER16 Collet - 4 mm
- ER16 Collet - 5/16 in.
- ER16 Collet - 5/64 in.
- ER16 Collet - 6 mm
- ER16 Collet - 7 mm
- ER16 Collet - 7/32 in.
- ER16 Collet - 7/64 in.
- ER16 Collet - 8 mm
- ER16 Collet - 9 mm
- ER16 Collet - 9/32 in.
- ER16 Collet - 9/64 in.
- ER16 Collet Chuck
- ER16 Collet Nut
- ER16 Collet Set (12 Pcs.) - Metric
- ER16 Collet Set (22 Pcs.) - Inch
- ER16 Collet Set (8 Pcs.) - Metric
- ER16 TSC Sealed Collet Set (17 Pcs.) - Inch
- ER16 TSC Sealed Collet Set (8 Pcs.) - Metric
- ER16M Collet Nut Wrench
- ER16M x 3/4" Collet Chuck
- ER16M x M10 Modular Collet Chuck
- ER20 Collet - 1.5 mm
- ER20 Collet - 1/16 in.
- ER20 Collet - 1/2 in.
- ER20 Collet - 1/4 in.
- ER20 Collet - 1/8 in.
- ER20 Collet - 10 mm
- ER20 Collet - 11 mm
- ER20 Collet - 12 mm
- ER20 Collet - 13/32 in.
- ER20 Collet - 15/32 in.
- ER20 Collet - 15/64 in.
- ER20 Collet - 19/64 in.
- ER20 Collet - 21/64 in.
- ER20 Collet - 23/64 in.
- ER20 Collet - 25/64 in.
- ER20 Collet - 27/64 in.
- ER20 Collet - 29/64 in.
- ER20 Collet - 3 mm
- ER20 Collet - 3/16 in.
- ER20 Collet - 3/64 in.
- ER20 Collet - 3/8 in.
- ER20 Collet - 31/64 in.
- ER20 Collet - 4 mm
- ER20 Collet - 5/16 in.
- ER20 Collet - 6 mm
- ER20 Collet - 7/16 in.
- ER20 Collet - 7/32 in.
- ER20 Collet - 7/64 in.
- ER20 Collet - 8 mm
- ER20 Collet - 9 mm
- ER20 Collet - 9/64 in.
- ER20 Collet Chuck
- ER20 collet chuck with MT2 taper shank
- ER20 Collet Nut
- ER20 Collet Set (11 Pcs.) - Metric
- ER20 Collet Set (14 Pcs.) - Metric
- ER20 Collet Set (15 Pcs.) - Inch
- ER20 Collet Set (30 Pcs.) - Inch
- ER20 TSC Sealed Collet Set (11 Pcs.) - Metric
- ER20 TSC Sealed Collet Set (25 Pcs.) - Inch
- ER20/ER16 Deluxe Wrench Set
- ER20M Collet Nut
- ER20M Collet Nut Wrench
- ER20M x 3/4 in. Collet Chuck
- ER20M x M12 Modular Collet Chuck
- ER32 Collet - 1/16 in.
- ER32 Collet - 1/2 in.
- ER32 Collet - 1/4 in.
- ER32 Collet - 1/8 in.
- ER32 Collet - 10 mm
- ER32 Collet - 11 mm
- ER32 Collet - 11/16 in.
- ER32 Collet - 11/32 in.
- ER32 Collet - 11/64 in.
- ER32 Collet - 12 mm
- ER32 Collet - 13 mm
- ER32 Collet - 13/32 in.
- ER32 Collet - 15/32 in.
- ER32 Collet - 15/64 in.
- ER32 Collet - 17/32 in.
- ER32 Collet - 17/64 in.
- ER32 Collet - 19/32 in.
- ER32 Collet - 19/64 in.
- ER32 Collet - 2 mm
- ER32 Collet - 21/32 in.
- ER32 Collet - 21/64 in.
- ER32 Collet - 23/32 in.
- ER32 Collet - 23/64 in.
- ER32 Collet - 25/64 in.
- ER32 Collet - 27/64 in.
- ER32 Collet - 29/64 in.
- ER32 Collet - 3 mm
- ER32 Collet - 3/16 in.
- ER32 Collet - 3/32 in.
- ER32 Collet - 3/4 in.
- ER32 Collet - 3/64 in.
- ER32 Collet - 3/8 in.
- ER32 Collet - 31/64 in.
- ER32 Collet - 33/64 in.
- ER32 Collet - 35/64 in.
- ER32 Collet - 37/64 in.
- ER32 Collet - 39/64 in.
- ER32 Collet - 4 mm
- ER32 Collet - 41/64 in.
- ER32 Collet - 43/64 in.
- ER32 Collet - 45/64 in.
- ER32 Collet - 47/64 in.
- ER32 Collet - 5 mm
- ER32 Collet - 5/16 in.
- ER32 Collet - 5/32" in.
- ER32 Collet - 5/64 in.
- ER32 Collet - 5/8 in.
- ER32 Collet - 6 mm
- ER32 Collet - 7 mm
- ER32 Collet - 7/16 in.
- ER32 Collet - 7/32 in.
- ER32 Collet - 8 mm
- ER32 Collet - 9 mm
- ER32 Collet - 9/16 in.
- ER32 Collet - 9/32 in.
- ER32 Collet Fixture for 6 Inch Rotary Tables
- ER32 Collet Set (11 Pcs.) - Inch
- ER32 Collet Set (12 Pcs.) - Inch
- ER32 Collet Set (12 Pcs.) - Metric
- ER32 Collet Set (18 Pcs.) - Metric
- ER32 Collet Set (21 Pcs.) - Inch
- ER32 Collet Set (6 Pcs.) - Inch
- ER32 Deluxe TTS™ Wrench Set
- ER40 Collet Fixture
- ER40 Collet Set (8 Pcs.) - Inch
- ER40 Collet Set (8 Pcs.) - Metric
- Estop Twist Lock
- Extended 5 in. Aluminum Soft Jaw Set
- Extended 5 in. Steel Soft Jaw Set
- External Contactor Kit
- Extra Tall 5 in. Steel Jaw Set
- EZ-Puller
- EZ-Puller with 3/4" Turret Compatible Mounting Kit
F
- Face Mill - 1 1/2 in.
- Face Mill - 38 mm
- Fan, 115 VAC
- Ferrite EMI Suppression Core, Plastic Case
- Filter/Regulator/Lubricator (FRL)
- FIRST Robotics Fixturing and Tooling
- Flare Nozzle for 1/4 in. Coolant Hose (5 PC)
- Flex Conduit 12 mm OD (price per meter)
- Flex Conduit 16 mm OD (price per meter)
- Flexible Conduit 10 mm OD (price per meter)
- Flexible Pin Spanner Wrench (2.9mm)
- Floating Tramp Oil Collection Pillow
- Flood Coolant Kit (1/8 HP) for 1100M/MX and 770M/MX
- Flood Coolant Kit for PCNC 440
- Flood Coolant Kit for PCNC 770
- Fog Buster Tank - Reservoir - Replacement
- FogBuster Coolant Kit (115 Vac) for 770M/770MX
- FogBuster Coolant Kit (115 Vac) for PCNC Mills
- FogBuster Coolant Kit (230 Vac) for 1100M/1100MX
- FogBuster Dual Nozzle Upgrade Kit
- Foot Pedal Switch
- Free SprutCAM 3 Month Trial
- Freestanding light curtain safety device with corner mirrors
- Front Bed Pan for PCNC 1100 Series I and Series II
- Front Bed Pan for PCNC 770
- Full Enclosure Kit for 15L Slant-PRO
- Full Enclosure Kit for PCNC 1100
- Full Enclosure Kit for PCNC 770
- Fuse .75A glass 5x20
- Fuse 0.6A
- Fuse 15A
- Fuse 1A, 1.25 x .25 glass
- Fuse 2.0A glass 5x20
- Fuse 250V Slo-Blo, 15A, 5x20 mm
- Fuse 3.0A Glass 5x20
- Fuse 6.3A glass
- Fuse 6A
- Fuse FU1 20A
- Fuse, 5A, 5x20mm, Glass
- Fuse, 5x20 Glass, 8A, 217 Series
- Fuse, 5x20mm, 10A, Glass Slow Blow
- Fuse, 5x20mm, 2.5A, Glass Slow Blow 1100M/MX
- Fuse, 5x20mm, 5A, Glass Slow Blow
G
- Gang Block Bushing - 1/2 in. ID
- Gang Block Bushing - 1/4 in. ID
- Gang Block Bushing - 3/8 in. ID
- Gang Block Bushing - 5/16 in. ID
- Gang Block Bushing - 5/8 in. ID
- Gang Tool Coolant Accessory Kit, 15L Slant-PRO
- Gasket, 5/16 in. Vacuum Neoprene Foam, 20 Feet
- Gauge Block Set (36 Pcs.)
- Gib Screw
- Grease, Hiwin G-05, 400g
- Grinding Wheel Balancing Stand
- GTN-3 Insert 10-Pack
- GTN-4 Insert 10-Pack
H
- Haimer 3D Sensor - New Generation (Metric)
- Haimer 3D Sensor Kit (BT30)
- HAIMER 3D-Sensor New Generation Kit (Metric)
- Haimer CENTRO Precision Centering Device
- Haimer Zero Master - Analog (Inch)
- Haimer Zero Master - Analog (Inch) w/ TTS™ Holder
- Hardened 5 in. Steel Jaw Set
- Hardened 6 in Steel Jaw Set
- Heavy Duty 60° V-Block / Clamp Set, Matched Pair
- Heavy Duty Flexible Roller Table
- Hexagon Broach: 10 mm x .590 in.x 8 mm
- Hexagon Broach: 3 mm x .140 in. x 8 mm
- Hexagon Broach: 4 mm x .220 in. x 8 mm
- Hexagon Broach: 5 mm x .280 in. x 8 mm
- Hexagon Broach: 6 mm x .330 in. x 8 mm
- Hexagon Broach: 8 mm x .480 in. x 8 mm
- High Quality 1/8 HP (100 W) Coolant Pump
- High Speed Machining
- High Speed Spindle Kit for Tormach 1100
- Hold to Run Switch
- Hook Spanner Wrench, 22-26 mm
- Horizontal Mount for Universal Spindle Arm
- Hose for Chrome Armored Coolant System
- HSS Cobalt Cut-off Blade
- HSS Slitting Saw: 2 in. x 1/16 in. x 1/2 in. x 28 T
- HSS Slitting Saw: 2 in. x 1/32 in. x 1/2 in. x 28T
- HSS Slitting Saw: 3 in. x 1/8 in. x 1 in. x 30T
- HSS Slitting Saw: 3 in. x 3/32 in. x 1 in. x 30T
- Huot 5C Collet Rack
- Huot ER16 Collet Rack
- Huot ER20 Collet Rack
- Huot Fractional Drill Gauge (1/16 in. - 1/2 in.)
- Huot Multi-Purpose Dispenser
- Hypertherm cartridge adapter (for using SmartSYNC cartridges with Duramax Torches)
- Hypertherm cartridge: SmartSYNC or adapter 105A mechanized cutting
- Hypertherm cartridge: SmartSYNC or adapter 30-45A mechanized FineCut
- Hypertherm cartridge: SmartSYNC or adapter 45A mechanized cutting
- Hypertherm cartridge: SmartSYNC or adapter 65A mechanized cutting
- Hypertherm cartridge: SmartSYNC or adapter 85A mechanized cutting
- Hypertherm Essential Consumable Kit for 45 amp Torch (not compatible with SYNC Plasma Source)
- Hypertherm Essential Consumables for 65 amp Torch (not compatible with SYNC Plasma Source)
- Hypertherm Essential Consumables for 85 amp Torch (not compatible with SYNC Plasma Source)
- Hypertherm Ohmic Touchoff Ring
- Hypertherm Shade 6 Face Shield
- Hypertherm Shade 8 Face Shield
I
- I x 2-7/8 in. x 4-1/8 in. 10-Pack Drills
- ICSN 332 Shim Seat
- ID Threading Tool: CNL0750P16
- ID Threading Tool: CNR0750P16
- ID Threading Tool: SIL0375H11
- ID Threading Tool: SIR0375H11
- Imperial Ball Replacement Tip for Haimer Zero Master
- Imperial Long Stylus Tips for Haimer Zero Master
- Insert Clamp
- Insert Clamp
- Insert Clamp
- Insert Clamp
- Insert Clamp
- Insert Clamp
- Insert Clamp
- Insert Screw 3.5MM Torx Head for Shear Hog (10pk)
- Insert Screw for 3/8 in. Lathe Toolholder
- Insert Screw Shear-Hog - 2 in.
- Insert Screw TTS™ Shear-Hog
- Insert Tool - T10
- Insert Tool - T15
- Insert Tool - T20
- Insert Tool - T7
- Insert Tool - T8
- Insert Tool - T9
- Interchangeable Point Live Center Set
- IP54 OriginCal Absolute Digital Calipers 0 to 6 in.
- ISO20 CNC Operator Set (Inch)
- ISO20 Tool Holder Fork
- ISO20 Tool Holder Wrench
- ISO20 Tool Holder, ER16A, 30mm Gauge Length
- ISO20 Tool Holder, ER20A, 30mm Gauge Length
- ITSN 332 Shim Seat
- IVSN 432 Shim Seat
- IWSN 432 Shim Seat
J
- J x 2-7/8 in. x 4-1/8 in. 10-Pack Drills
- J3 Cable
- J4 Cable
- J6 Cable
- J6 Ribbon Cable for 15L Slant-PRO Lathe
- JCL Insert 10-Pack
- JCQ Insert 10-Pack
- Jog Shuttle Controller
K
- K x 2-15/16 in. x 4-1/4 in. 10-Pack Drills
- Key Switch w/Keys
- Keyless Drill Chuck - 1/4 in. - JT1
- Keyless Drill Chuck - 3/8 in.- JT2
- Keyless Drill Chuck - 5/8 in. - JT6
- Knob
- Knurling Tool Holder (Size 0XA)
L
- Laser Edge/Center Finder (Bullseye)
- Laser Edge/Center Finder (Bullseye) with Low Profile TTS™ Holder
- Laser Edge/Center Finder (Center Spot)
- Laser Edge/Center Finder (Center Spot) with Low Profile TTS™ Holder
- Laser Safety Area Scanner Kit - includes scanner, USB programming cable, communication cable from scanner to M12 connector
- Lathe Enclosure Door Glass
- Lathe Test Piece Kit
- Lathe Tool Starter Kit #1
- Lathe Turret Oil, 1 Qt.
- LED Assembly (2 LEDs)
- Leveling Caster Kit, 1000kg
- LH Boring Bar: S05H-STFCL-2
- LH Boring Bar: S06H-SCLCL-2
- LH Boring Bar: S08Q-STFCL-2
- LH Boring Bar: S10R-STFCL-2
- LH Boring Bar: S12S-DCLNL-3
- LH Boring Bar: S12S-SCLCL-4
- LH Boring Bar: S12S-STFCL-3
- LH Grooving Tool: SGTHL 12.7-3
- LH Grooving Tool: SGTHL 19-3
- LH Grooving Tool: SGTHL 19-4
- LH Grooving Tool: SGTHL 9.5-3
- LH Heavy Duty Gang Block
- LH Profile Tool: SDJCL 08-3A
- LH Profile Tool: SVJBL 08-2A
- LH Turning Tool: SDJCL 12-3C
- LH Turning Tool: SVJBL 12-2C
- LH Turning/Facing Tool: MCLNL 12-4C
- LH Turning/Facing Tool: MTFNL 12-3C
- LH Turning/Facing Tool: MVJNL 12-3C
- LH Turning/Facing Tool: MWLNL 12-4C
- LH Turning/Facing Tool: SCLCL 06-2J
- LH Turning/Facing Tool: SCLCL 08-3A
- LH Turning/Facing Tool: SCLCL 12-4B
- Lifting Bar Kit
- Lifting Kit for Tormach 15L Slant-PRO
- Light Curtain Safety Device - Long Version
- Light Curtain Safety Device - Short
- Light Kit for Tormach 15L Slant-PRO
- Light Shield for PCNC 1100 Full Enclosure
- Load Meter for PCNC 1100 Series 3
- Logitech MK270 Full Size Wireless Keyboard and Mouse Combo
- Long Gang Plate
- Lower Z-Axis Bumper for PCNC 770
- Lubrication System - M6 Elbow for 6 mm Oil Lines
- Lubrication System - Oil Fitting Flow Restrictor
- Lubrication System Gib Orifice Fitting
- Lubrication System Nut and Ferrule Bundle
- Lyndex TTS™ Adapter Collet: R8
M
- M & MX Series Enclosure LED Floodlight, 50W
- M x 3-1/16 in. x 4-3/8 in.10-Pack Drills
- M10 X 1.25 Tap
- M10 X 1.5 Tap
- M12 connector splitter
- M12 Plug, Inline, Male Pins, 5 Position, A Keying
- M12 X 1.25 Tap
- M2.5 x 6 mm Insert Screw
- M3 - 0.5, D3 Tap
- M3 X 0.5 Tap
- M3.5 - 0.6, D4 Tap
- M3.5 X 0.6 Tap
- M3.5 x 8 mm Insert Screw
- M4 - 0.7, D4 Tap
- M4 X 0.7 Tap
- M4 x 10 mm Insert Screw
- M5 X 0.8 Tap
- M6 - 1.0, D5 Tap
- M6 X 1.0 Tap
- M7 X 1.0 Tap
- M8 - 1.25, D5 Tap
- M8 X 1.0 Tap
- M8 X 1.25 Tap
- M8 x 25 mm Socket Head Cap Screw
- Machinable Gang Block
- Machine Assembly (Additional Cost, Check Box to Quote)
- Machine Assembly (Optional)
- Machine Control Board
- Machine Way Oil (1 Gallon)
- Magnetic Encoder, Readhead
- Magnetic Encoder, Spindle Ring
- Magnetic Encoder, Spindle Ring-Readhead Pair
- Manual Oil Pump
- Manual Oil Pump
- Manual Oiler Gasket Kit
- Manual Operator Set (Inch)
- Manual Operator Set (Metric)
- Metric Ball Replacement Tip for Haimer Zero Master/ 3D Sensor
- Metric Long Stylus Tips for Haimer Zero Master/ 3D Sensor
- microARC 4 - 100 mm 4th Axis
- microARC 4 Subplate
- microARC 6 - 150mm Rotary Table Kit for 1500MX
- microARC 6 Subplate
- Milling Insert: EOHW060220ZTR (DIJET QM MINI) 10-Pack
- Milling Insert: EOMT060210ZER (DIJET QM MINI) 10-Pack
- Milling Insert: EOMW060210ZER (DIJET QM MINI) 10-Pack
- Milling Insert: RDMW0702MO 10-Pack
- Milling Insert: RDMW1003MO 10-Pack
- Milling Insert:EOHW060210ZTR (DIJET QM MINI) 10-Pack
- Mini-Shear - .500 in.
- Mini-Shear - .500 in. MIT Cutting Head
- Mini-Shear - 1 in. Cutting Head
- Mini-Shear -.750 in. MIT Cutting Head
- Mist Collector, 420cfm
- Modular Insert End Mill: 17 mm
- Modular Insert End Mill: 20 mm
- Modular Insert Toroidal Mill: 12 mm
- Modular Insert Toroidal Mill: 13 mm
- Modular Insert Toroidal Mill: 17 mm
- Modular Insert Toroidal Mill: 20 mm
- Modular Insert Toroidal Mill: 21 mm
- Modular Insert Toroidal Mill: 22 mm
- Modular Insert Toroidal Mill: 9 mm
- Modular Tension/Compression Tapping Head Kit
- Modular Vacuum Chuck Kit
- Motor pulley
- Mounting Block for ETS
- Mounting plate for x limit switch
- MQL Full Kit - 1500 MX
- MT-1 Arbor for Medium Tailstock
- MT-1 Live Center
- MT-3 Live Center
- MT2 Alignment Kit for ER32 Collet Fixture
- MT2 Alignment Kit for ER40 Collet Fixture
- MT2 Arbor Adapter for JT1
- MT2 Arbor Adapter for JT2
- MT2 Arbor Adapter for JT6
- MT2 Tool Holder (Size 0XA)
- MT3 Alignment Kit for ER32 Collet Fixture
- MT3 Alignment Kit for ER40 Collet Fixture
- Multi-V 5 in. Jaw Set
N
- NEMA 34 Replacement Stepper Motor, Rotary Table
- Neoprene Cord - 10 ft
- Neoprene Discs, Qty. 50
- NH Parting Tool Kit: SLTBN19-5
- NH Profile Tool: SCMCN 06-2J
- NH Profile Tool: SCMCN 08-3A
- NH Profile Tool: SCMCN 12-4B
- NH Profile Tool: SDNCN 06-2J
- NH Profile Tool: SDNCN 08-3A
- NH Profile Tool: SSDCN 08-3A
- NH Profile Tool: SSDCN 12-4C
- NH Profile Tool: SVVBN 08-2A
- NH Turning Tool: SDNCN 12-3C
- NH Turning Tool: SRDCN 06-2J
- NH Turning Tool: SRDCN 08-6A
- NH Turning Tool: SRDCN 12-6C
- NH Turning Tool: SVVBN 12-2C
- NH Turning/Facing Tool: MVVNN 12-3C
- Nozzle, Duramax and Duramax Lock, 30-45 A, FineCut
- Nozzle, Duramax and Duramax Lock, 45 A
- Nozzle, Duramax Lock, 10-25 A, Precision Gouging and Marking
- Nozzle, Duramax, 65 A, Cutting
- Nut for 4 mm lubrication system
- Nut M33x1.5
- Nut, Jam M12x1.75
- Nut, Round Lock M24
O
- O x 3-3/16 in. x 4-1/2 in. 10-Pack Drills
- O-Ring, 9mm x 12mm x 1.5mm, Buna-N
- OD Threading Tool: CEL0750K16
- OD Threading Tool: CER0750K16
- OD Threading Tool: SEL0500H11
- OD Threading Tool: SER0500H11
- OD Turning/Facing Holder for Turret
- OD Turning/Facing Holder for Turret
- Oil Can
- Oil Skimmer Kit for 1100M/1100MX, 770M/770MX, and PCNC 440
P
- P x 3-5/16 in. x 4-5/8 in.10-Pack Drills
- Package of 2 ER16M Collet Nut
- Package of 5 Mini-Shear Insert Screws
- Parallel Jaw Gripper Kit
- Partial Machine Assembly (Optional)
- Passive Probe - Probe Only
- Passive Probe Kit
- Passive Probe Kit (BT30)
- PathPilot Controller
- PathPilot Controller for PCNC Mills and 15L Lathe
- PathPilot Controller Vesa Mount
- PathPilot Keyboard Shortcuts Mousepad
- PathPilot Robot Controller - Rev. C
- PathPilot Software Bootable USB Drive - Recovery Media
- PCNC 1100 C1/C2 Contactor
- PCNC 1100 Extended Warranty
- PCNC 1100 Power Drawbar
- PCNC 440 Advanced EDU Bundle
- PCNC 440 Basic EDU Bundle
- PCNC 440 Chip Pan
- PCNC 440 Driver & Wiring Kit for 100mm 4th Axis
- PCNC 440 Enclosure Door Switch Kit
- PCNC 440 Enclosure Kit
- PCNC 440 Enclosure Kit
- PCNC 440 Entry Package
- PCNC 440 Extended Warranty
- PCNC 440 Fuse 2A
- PCNC 440 Gib Screw
- PCNC 440 Intermediate EDU Bundle
- PCNC 440 Power Drawbar Kit
- PCNC 440 Premium Package
- PCNC 440 Premium Package With ATC
- PCNC 440 Printed Manual
- PCNC 440 Spindle Cartridge
- PCNC 440 Stand
- PCNC 440 Starter Package
- PCNC 440 Way / Bellows Stand Off
- PCNC 440 Y-Axis Front Way Cover / Bellow Cover
- PCNC 440 Y-Axis Rear Way Cover / Bellow Cover
- PCNC 440 Z-Axis Way Cover / Bellow Cover
- PCNC 440 Z-Bellows / Way Bracket
- PCNC 770 and PCNC 440 C1 Contactor
- PCNC 770 C2 Contactor
- PCNC 770 Enclosure Large Door Window
- PCNC 770 Extended Warranty
- PCNC 770 Power Drawbar
- PCNC 770 Series 1 Axis Power Distribution Board AC/DC
- PDB Cable Carrier
- PDB Cylinder Rebuild Kit for all 1100, 770 and 440 mills
- Pin 6X25
- Pin 8x30
- Plain Center Drill Set
- Plastic Fixturing Compound
- Pneumatic Hose Kit for Power Drawbar/ATC/Fogbuster
- Portable Refractometer - Coolant Tester
- Potentiometer
- Potentiometer
- Power Draw Bar Pendant Assembly
- Power Draw Bar Valve Assembly
- Power Drawbar Foot Pedal Kit
- Power Drawbar Kit for 1100M / 770M
- Power Drawbar Pendant Overlay
- Power Drawbar Spring Washer
- Power Outlet (IEC 320-2-2/F, C14 Single Socket), Spade Terminals
- Power Strip 3 AC Kit for 15L
- Power Supply Cord - 8 ft.
- Powermax105 SYNC Hypertherm plasma cutter
- Powermax45 Sync Hypertherm Plasma Cutter
- Powermax65 SYNC Hypertherm plasma cutter
- Powermax85 SYNC Hypertherm plasma cutter
- Probe Stylus, 50mm Length, 6mm Ruby Ball, M4 Thread
- Probe Wrench Set
- Professional Metalworking Gauge Set
- Professional Vise Jaw Set
- Professional Vise Jaw Set w/ Pin Jaw
- Proximity Sensor
- PSG 612 Grinding Wheel Arbor
- PSG612 Inductive Proximity Sensor
- Pull Stud, BT30 45-Degree
- Pull Stud, BT30-45 deg., Thru Spindle Coolant (TSC)
- Push button PB2
Q
- Q x 3-7/16 in. x 4-3/4 in. 5-Pack Drills
- QC Motor Connection Kit
- QualiChem XTREME CUT 251C
- Quick Change Tool Post (CXA)
- Quick Change Tool Post (Size 0XA)
- Quick Change Tool Post Kit for Tormach 15L Slant-PRO Lathe
- Quick Change Tool Post Mounting Plate for Tormach 15L Slant-PRO
R
- R x 1-11/16 in. x 3 in. 5-Pack Drills
- R x 3-7/16 in. x 4-3/4 in. 5-Pack Drills
- R8 Drawbar for 1100M, 770M, PCNC 1100, and PCNC 770 Power Drawbar
- R8 Spindle Cartridge Assembly
- Radius Diamond Pin (12 mm)
- Rapid Turn Subplate
- RapidTurn Deluxe Package
- RapidTurn Programming Key Set
- RapidTurn Spindle Speed Sensor Assembly
- RapidTurn Starter Package
- RapidTurn Tool Post Stabilizer
- RCGT 2(1.5)MO Insert 10-Pack
- RCMT 2(1.5)MO Insert 10-Pack
- Rebuild kit - 1500MX Spindle Drawbar Assembly
- Replacement 1/4 in. Coolant Hose
- Replacement Filter Cartridge, 10 in. x 2-5/8 in. OD x 1 in. ID
- Replacement Left Door Window 1100M/MX
- Replacement Left Door Window 770M/MX
- Replacement Level Gauge Sight Glass for M/MX
- Replacement Limit Switch
- Replacement Motor Belt for AF50 Bandsaw
- Replacement OEM Coolant Pump 115VAC for PCNC 1100 / PCNC 770 / PCNC 440 / 15L Slant-PRO
- Replacement PCNC 440 Axis Motor Drive - MX3660
- Replacement Probe Cord
- Replacement Probe Cord for PN 30668
- Replacement Right Door Window 1100M/MX
- Replacement Right Door Window 770M/MX
- Replacement Side Window for 1100M / MX
- Replacement Side Window for 770M / MX
- Replacement Speeder Belt
- Replacement Spindle lock 440
- Replacement Spindle Pulley Belt for PCNC 1100 - Belt 3V280
- Replacement Spring for Diamond Drag Engraver (Heavy Duty)
- Replacement Spring for Diamond Drag Engraver (Light Duty)
- Replacement Spring for ER16 Tapping Head - Lower
- Replacement Spring for ER20 / ER16 Tapping Head - Upper
- Replacement Spring for ER20 Tapping Head - Lower
- Replacement Window, 440 Enclosure Door Lexan - Left Door
- Replacement Window, 440 Enclosure Door Lexan - Right Door
- Replacement Wireless Probe for 1500MX
- Retaining Cap, Mechanized Ohmic, Duramax and Duramax Lock, 15-105 A
- Reverse Action Quick Change Tool Post (Size 0XA)
- RH Boring Bar: S05H-STFCR-2
- RH Boring Bar: S06H-SCLCR-2
- RH Boring Bar: S06M-STFCR-2
- RH Boring Bar: S08M-SCLCR-2
- RH Boring Bar: S08Q-STFCR-2
- RH Boring Bar: S10R-STFCR-2
- RH Boring Bar: S12S-DCLNR-3
- RH Boring Bar: S12S-SCLCR-4
- RH Boring Bar: S12S-STFCR-3
- RH Chamfer Tool: SCSCR 06-2J
- RH Chamfer Tool: SCSCR 08-3A
- RH Chamfer Tool: SCSCR 12-4B
- RH Facing Tool: SCKCR 06-2J
- RH Facing Tool: SCKCR 08-3A
- RH Facing Tool: SCKCR 12-4B
- RH Grooving Tool: SGTHR 12.7-3
- RH Grooving Tool: SGTHR 19-3
- RH Grooving Tool: SGTHR 19-4
- RH Grooving Tool: SGTHR 9.5-3
- RH Heavy Duty Gang Block
- RH Profile Tool: SDJCR 08-3A
- RH Profile Tool: SVJBR 08-2A
- RH Turning and Facing Holder, 1/2 in. Center for 1/2 in. Square Tool
- RH Turning Tool: SCBCR 08-3A
- RH Turning Tool: SCBCR 12-4B
- RH Turning Tool: SDJCR 06-2J
- RH Turning Tool: SDJCR 12-3C
- RH Turning Tool: SVJBR 12-2C
- RH Turning/Facing Tool: MCLNR 12-4C
- RH Turning/Facing Tool: MTFNR 08-2A
- RH Turning/Facing Tool: MTFNR 12-3C
- RH Turning/Facing Tool: MTGNR 08-2A
- RH Turning/Facing Tool: MVJNR 12-3C
- RH Turning/Facing Tool: MWLNR 12-4C
- RH Turning/Facing Tool: SCBCR 06-2J
- RH Turning/Facing Tool: SCLCR 06-2J
- RH Turning/Facing Tool: SCLCR 08-3A
- RH Turning/Facing Tool: SCLCR 12-4B
- RH Turning/Facing Tool: SDJCR 08-3A
- RH Turning/Facing Tool: STFCR 12-3C
- Rigid Tapping
- Riser for 1/2 in. Center Gang Blocks
- Robot Table
- Robot welding torch holder kit
- Round Nozzle Assortment for 1/4 in. Coolant Hose. (3 PC)
S
- S x 1-3/4 in. x 3-1/16 in. 5-Pack Drills
- S x 3-1/2 in. x 4-7/8 in. 5-Pack Drills
- Safety Interlock Door Switch
- Saunders Machine Works 4140 Fixture Plate for 1500MX
- Screw - Ball Precision Cutter 16 mm
- Screw - Ball Precision Cutter 8 mm
- Screw - Center Cut End Mill 17 mm
- Screw - Face & End Mills
- Screw - SEHT Insert Cutters
- Screw - Toroidal Cutter 16 mm
- Sealant, Sikaflex 1a, 300mL Cartridge, Black
- Series 3 Motion Upgrade Kit for PCNC 1100 SN 1-999
- Series 3 Motion Upgrade Kit for PCNC 1100 SN 1000 - 1999
- Shaft Clamp
- Shear-Hog - 1 in. MIT Cutting Head
- Shear-Hog - 2 in.
- Shield, Duramax and Duramax Lock, 15-85 A, mechanized cutting
- Shield, Duramax Lock, 10-25 A, Marking
- Shield, Duramax, Mechanized Ohmic, 30-45 A, FineCut
- Shim Kit for Gang Risers
- Shim Kit for Heavy Duty Gang Blocks
- Shim Kit, Mill Stand Leveling
- Shim Screw
- Shim Screw
- Shim Screw
- Short Gang Plate
- Single Fuse Block
- Sleeve
- Sleeve
- Slitting Saw 2 in. x 1/2 in. x 1/16 in. x 24T
- Slitting Saw 2 in. x 1/2 in. x 1/32 in. x 24T
- Slitting Saw 2 in. x 1/2 in. x 1/32 in. x 48T
- Slitting Saw 2 in. x 1/2 in. x 1/8 in. x 24T
- Slitting Saw 2 in. x 1/2 in. x 1/8 in. x 48T
- Slitting Saw 2 in. x 1/2" in.x 1/16 in. x 48T
- Slitting Saw 2 in.x 1/2 in. x 3/32 in. x 24T
- Slitting Saw 3 in. x 1 in. x 1/16 in. x 30T
- Slitting Saw 3 in. x 1 in. x 1/16 in. x 60T
- Slitting Saw 3 in. x 1 in. x 1/32 in. x 30T
- Slitting Saw 3 in. x 1 in. x 1/32 in. x 60T
- Slitting Saw 3 in. x 1 in. x 1/8 in. x 30T
- Slitting Saw 3 in. x 1 in. x 1/8 in. x 60T
- Slitting Saw 3 in. x 1 in. x 3/32 in. x 30T
- Slitting Saw 3 in. x 1 in. x 3/32 in. x 60T
- Slotted Type E ER40 Collet Wrench
- Small Granite Surface Plate with Integrated Tool Hole
- SmartCool Starter Kit
- SMW 1100 Tool Plate Bundle
- SMW 770 Tool Plate Bundle
- SMW PCNC 440 Tool Plate Bundle
- Socket, BT30 Pull Stud
- Software Updates
- Solenoid Kit - two solenoid valves for 6mm pneumatic tube on backing plate with M12 connector for use with ZA6
- Solenoid Valve ATC 1100 770 440 PDB
- Spanner Wrench 55-62 mm
- Spanner Wrench 78-85 mm
- Spindle Alignment Clamp
- Spindle Belt, 800-5m-15
- Spindle Cartridge Assembly - 1100M
- Spindle Cartridge Assembly for PCNC 770
- Spindle Cleaner, BT30
- Spindle Door Latch
- Spindle Door Latch Kit
- Spindle Motor for 1100 Mills
- Spindle Motor for 15L Slant-PRO
- Spindle Motor for 770 Mills
- Spindle Motor Pulley for PCNC 770
- Spindle Orientation
- Spindle pulley
- Spindle Pulley Belt for 770M and 770MX
- Spindle Pulley Belt for PCNC770 - 185J4
- Spindle Pulley for PCNC 770
- Spindle Speeder
- Spray Bottle Holder Kit
- Spring-Loaded CNC Drag Knife
- Spring-Loaded Tap Guide
- SprutCAM OEM Advanced
- SprutCAM OEM Lathe (Online)
- SprutCAM OEM Plasma (Online)
- SprutCAM OEM Standard
- SprutCAM OEM Ultimate (Online)
- Stand Door latch Center
- Stand Door latch left
- Stand Door latch Right
- Standard 5 in. Aluminum Soft Jaw Set
- Standard 5 in. Steel Step Jaw Set
- Standard Fixture Plate Accessory Upgrade Kit
- Standard LCD Monitor
- Starter Tool Kit for High Speed Spindle
- Steel Endmill Kit #2
- Stepper Driver
- Stepper Driver
- Stepper Motor
- Stepper motor - Z axis 770M (Includes 24VDC Brake)
- Stock metal probe tip for the passive probe
- Stop-Loc Setup Tool
- Storm Vacuum Pump for 24R
- Storm Vacuum Pump for 24R Kit
- Stub Handle for Quick Change Tool Post (CXA)
- Stylus Safety Leash
- Super Air Knife
- SuperSoft Jaws Kit
- SVGA Video Extension Cable - 15 ft.
- Swirl Ring, Duramax and Duramax Lock, 10-85 A
- Swirl Ring, Duramax and Duramax Lock, 30-45 A, FineCut
T
- T x 3-1/2 in.x 4-7/8 in. 5-Pack Drills
- T-Slot Bridge Nut for PCNC 1100, 1100M & 1100MX
- T-Slot Bridge Nut for PCNC 440
- T-Slot Clamp Set
- T-Slot Cleaner
- TalonGrip / VersaGrip Vice Jaws - Mitee-Bite PN 33006 - Not Compatible with Tormach 5" vise
- TalonGrip™ Vise Jaw Systems - Mitee-Bite Part Number 32066 - Not Compatible with Tormach 5" vise
- Tap/Drill Wall Chart
- Tapered Dowel Pin, 8x40 mm
- TCGT 221-aluminum-10-Pack
- TCGT 3(2.5)2 Insert 10-Pack
- TCMT 3(2.5)2 Insert 10-Pack
- TCMT221 - Steel -10 Pack
- TCMT222 - High Temp Alloys - 10-Pack
- Tee Fitting: 1/4 in. PTC x 1/4 in. NPT
- Terminal Strip, Lower for PCNC 770
- Through Spindle Coolant Kit, 1500MX
- TNMG 332 Insert 10-Pack
- Tool Bar - TTS™ SuperFly Cutter
- Tool Height Setter, Dial Indicator
- Tool Holder SCLCR12-3C
- Tool Holder SCLCR12-4C
- Tool Storage Rack Assembly, 1500MX
- Tool Tightening Fixture
- Tool Tightening Fixture, BT30
- Tool Tightening Fixture, ISO20
- Tormach Branded Hooded Sweatshirt
- Tormach Branded T-shirt Green
- Tormach Branded T-shirt Grey
- Tormach Branded T-shirt Navy
- Tormach Circle Sticker, 3"x3"
- Tormach Coffee Cup (Black)
- Tormach Logo -vinyl
- Tormach Logo Sticker, 5"x2", Die-Cut
- Tormach RapidTurn 5C Chucker Lathe Accessory
- Tormach Tool Assistant Set
- Tormach Trucker Hat, Camo
- Tormach Trucker Hat, Navy
- Tormach Tumbler With Handle, Navy
- Tormach Unstructured Hat, Navy
- Tormach xsTECH Aluminum Fixture Tooling Plate
- Touch Screen Kit
- TPMT 2(1.5)1 Insert 10-Pack
- Transformer for 770
- Transformer XFM1
- Transformer XFM2
- TTS™ Boring Arbor: 7/8 in. x 20 UNF
- TTS™ CNC Operator Set with Tormach Tool Assistant
- TTS™ Collar: 3/4 in.
- TTS™ Diamond Drag Engraver Kit
- TTS™ Drill Chuck Arbor: JT1
- TTS™ Drill Chuck Arbor: JT2
- TTS™ Drill Chuck Arbor: JT33
- TTS™ Drill Chuck Arbor: JT6
- TTS™ ER Collet Holder: ER16
- TTS™ ER Collet Holder: ER20
- TTS™ ER Collet Holder: ER32
- TTS™ ER Collet Tap Holder: ER16
- TTS™ ER Collet Tap Holder: ER20
- TTS™ Gauge Holder: 10 mm
- TTS™ Gauge Holder: 12 mm
- TTS™ Gauge Holder: 16 mm
- TTS™ Gauge Holder: 3/8 in.
- TTS™ M10 Threaded Arbor: Long
- TTS™ M10 Threaded Arbor: Medium
- TTS™ M10 Threaded Arbor: Short
- TTS™ M12 Threaded Arbor: Long
- TTS™ M12 Threaded Arbor: Medium
- TTS™ M12 Threaded Arbor: Short
- TTS™ M4 Threaded Arbor: Long
- TTS™ M4 Threaded Arbor: Medium
- TTS™ M6 Threaded Arbor: Long
- TTS™ M6 Threaded Arbor: Medium
- TTS™ M6 Threaded Arbor: Short
- TTS™ M8 Threaded Arbor: Long
- TTS™ M8 Threaded Arbor: Medium
- TTS™ M8 Threaded Arbor: Short
- TTS™ Machinable Blank
- TTS™ Metric Tool Holder Set
- TTS™ Mini-Shear .750 in.
- TTS™ Quick Change Tapping Chuck
- TTS™ Rotary Broach Holder
- TTS™ Rotary Broach Kit
- TTS™ Saw Arbor: 1 in.
- TTS™ Saw Arbor: 1/2 in.
- TTS™ Set Screw Holder: 1/2 in.
- TTS™ Set Screw Holder: 1/4 in.
- TTS™ Set Screw Holder: 10mm
- TTS™ Set Screw Holder: 12mm
- TTS™ Set Screw Holder: 3/8 in.
- TTS™ Set Screw Holder: 5/16 in.
- TTS™ Set Screw Holder: 6mm
- TTS™ Shear-Hog - 0.750 in.
- TTS™ Shear-Hog - 2 in.
- TTS™ Shell Mill Arbor: 1/2 in.
- TTS™ SuperFly Cutter Kit
- TTS™ to BT30 ATC Conversion Kit, 1100M
- TTS™ to BT30 ATC Conversion Kit, 770M
- TTS™ to BT30 Power Drawbar Conversion Kit
- TTS™ Tool Rack
- TTS™ Tool Tray
- TTS™ Touch Tool Fixture Only with Box
- TTS™ Touch Tool w/Digital Indicator and Box
- TTS™ Touch Tool w/Mechanical Indicator and Box
- TTS™ Wrench Set
- TTS™-MT3 Collet & Drawbolt
- Tubing, Polyethylene Air Line, 1/4IN OD, black, sold per ft
- Turning & Boring Tool Holder (Size 0XA)
- Turning & Facing Tool Holder (Size 0XA)
- Turret Kit for Tormach 15L Slant-PRO
- Turret Tool Holder Bushing - 1/2 in. ID
- Turret Tool Holder Bushing - 1/4 in. ID
- Turret Tool Holder Bushing - 3/8 in. ID
- Turret Tool Holder Bushing - 5/16 in. ID
- Turret Tool Holder Bushing - 5/8 in. ID
U
- Unist MQL Coolant Pump and Coolube, w/out Valve
- Universal Spindle Arm
- Upgrade/Replacement Motor for 6 in. Rotary Tables
- USB 2.0 HUB 4-Port
- USB 3.0 to Gigabit Ethernet Network Adapter
- USB Bulkhead Cable - 3 ft.
- USB Bulkhead Port Assembly
- USB Camera for PathPilot-Controlled Machines
- USB Extension Cable - 10 ft.
- USB Height Gauge USB Interface
- USB M-Code I/O Interface Kit
V
- V x 3-5/8 in. x 5 in. 5-Pack Drills
- Vacuum Pump Exhaust Filter
- Vacuum Sponge Cup Gripper
- Vacuum Table Grid Gasket: 1/4 x 5/16 D Shape, 10 ft
- Vacuum Table Grid Gasket: 1/4 x 5/16 D Shape. 100 ft. roll.
- Valve for 1/4 in. Coolant Hose (5 PC)
- VCarve Pro
- VersaGrip™ Vise Jaws - Mitee-Bite - Compatible with Tormach 4 in. and 5 in. vises
- VFD - Commander C200 - 2 HP 230VAC - Prog 1100M/MX
- VFD for 770M / 770MX / 8L
- VFD Motor Drive 770
- VNMG 332 Insert 10-Pack
W
- W x 3-3/4 in. x 5-1/8 in. 5-Pack Drills
- Washer
- Water Chiller Kit
- Water Chiller Treatment, 1 pint
- Water Chiller. 115VAC 60 Hz
- Waterproof Mini-Keyboard
- Waterproof Mouse
- Wavy Parallel Set
- Window, Side Unit for PCNC440 Enclosure, Lexan
- Window, Top Unit for PCNC440 Enclosure, Lexan
- Wireless (Wi-Fi) Network Adapter for PathPilot Controller
- Wireless Probe and Tool Setter Kit
- WNMG 432 Insert 10-Pack
- Work Stop
X
- X & Y-Axis Rubber Bumper
- X and Y Ball Screw Pre-Load Nut for PCNC 770
- X Axis Ball Screw and Nut for PCNC 1100, 1100M and 1100MX
- X Ball Screw for PCNC 770, 770M and 770MX
- X x 3-3/4 in. x 5-1/8 in. 5-Pack Drills
- X-Axis Motor for 15L Slant-PRO
- X-Axis Stepper Motor for 770M
- X-Axis Stepper Motor, PCNC 770 Series 1
- X/Y Axis Stepper Motor for PCNC 1100 (Series I and II Only)
- X/Y Stepper Motor for 770 (S3 / M)
- X/Y-Axis Motor for PCNC 1100 Series 3 or 1100M
- XDET 2.52-010 (Mini-Shear) Insert 10-Pack
- XDET 2.52.5 (Mini-Shear) Insert 10-Pack
- XDET 2.522 (Mini-Shear) Insert 10-Pack
- XDET 2.53-020 (Mini-Shear) Insert 10-Pack
- XDET 2.53-040 (Mini-Shear) Insert 10-Pack
- XDET 2.531 (Mini-Shear) Insert 10-Pack
- XL 5 in. Aluminum Soft Jaw Set
- xsTECH CNC Router/Mill
- xsTECH Cutting Tool Kit
- xsTECH NC3 End Mill Kit
- xsTECH Router - 230V (Europe)
- xsTECH Router 4th Axis Kit
- xsTECH Router BLDC With ER11 Collet Chuck Set
- xsTECH Router C13/C14 IEC connector
- xsTECH Router Clamp Set 2 Big and 2 Small
- xsTECH Router Estop connector
- xsTECH Router Fan Set 50x50x15 24v
- xsTECH Router Idle Wheel Set
- xsTECH Router Led Lighting Unit
- xsTECH Router Package
- xsTECH Router Power supply set 150w-24V
- xsTECH Router RJ45 ethernet connector
- xsTECH Router Safety cover
- xsTECH Router Shipping Case
- xsTECH Router Spindle Drive
- xsTECH Router Stepper Motor 42
- xsTECH Router Switch tr26
- xsTECH Router Working Table
- xsTECH Router Wrench Set
- xsTECH Router X-axis timing belt MXL 305 x 6.4mm
- xsTECH Router Y Axis Timing Belt MXL 256 x 6.4mm
- xsTECH Router Z-axis timing belt MXL 130x6.4mm
Y
- Y Ball Screw for PCNC 770, 770M and 770MX
- Y Fitting for 1/4 in. Coolant Hose (5 PC)
- Y Limit Switch.
- Y x 3-7/8 in. x 5-1/4 in. 5-Pack Drills
- Y-Axis Ball Screw and Nut for PCNC 1100
- Y-Axis Chip Flap Upgrade for Way Cover / Bellows Cover on 1100 Mills
- Y-Axis Chip Flap Upgrade for Way Cover / Bellows Cover on 770 Mills
- Y-Axis Cover Mounting Plate
- Y-axis Front Chip Flap Upgrade for 1100M, MX & PCNC 1100
- Y-Axis Stepper Motor for 770M
- Y-Axis Stepper Motor, PCNC 770 Series 1
- Y-axis Way Cover / Bellows Cover Upgrade Kit
- YG-1 ALU-POWER High Performance Carbide (HPC) End Mill Kit
- YG-1 V7 Plus A Series Steel, Cast Iron & Stainless End Mill Kit
Z
- Z Axis Ball Screw Pre-Load Nut for PCNC 770
- Z Ball Screw for PCNC 770, 770M, and 770MX
- Z x 3-7/8 in. x 5-1/4 in. 5-Pack Drills
- Z-Axis Ball Screw and Nut for PCNC 1100, 1100M, and 1100MX
- Z-Axis Ball Screw Tab Washers for Pre-Load Nut for PCNC 770
- Z-Axis Screw Lower Bumper
- Z-Axis Stepper Motor for 1100M
- Z-Axis Stepper Motor with Brake for PCNC 1100
- Z-Axis Stepper Motor with Brake for PCNC 770
- Z-Axis Upper Bumper
- ZA6 Robot Extended Warranty
- ZA6 Robot MultiGrip Kit
- ZA6 Robot Pneumatic Accessories Kit
- ZA6 Robot Probe Mount - Straight
- ZA6 Robot Starter Package
½
- ½ in. OD Tube for Flood Coolant Kit (1/8 HP) - (Sold per Foot)
- ½ in. PTC Elbow for Flood Coolant Kit (1/8 HP)
- ½ in. PTC Plug for Flood Coolant Kit (1/8 HP)