15L SLANT-PRO LATHE
Spindle
- Spindle Power: 3 hp (2.24 kW)
- Spindle Speed:
- Low: 180 to 2,500 RPM
- High: 250 to 3,500 RPM
- Spindle Taper: 5C (with removable insert)
- Spindle Bore Diameter: 1.53" (with 5C insert removed) (38.86 mm)
- Spindle Nose: D1-4 Camlock Mount
Motion
- Max Feed Rate X/Z: 60 IPM (1.52 m/min)
Power
- Power Required (Primary): 230 Vac single-phas - 20A breaker
- Power Required (Secondary): 115 Vac single-phase - 20A breaker
Machine Specifications
- Recommended Footprint: 72" x 42" (1829 mm x 1067 mm)
- Typical System Weight: 1800 lbs.
- Swing Over Bed Diameter: 15" (381 mm)
- Swing Over Carriage Diameter: 6.2" (157.5 mm)
- X-Axis Travel: 10" (254 mm)
- z-Axis Travel: 12" (305 mm)
- Recommended Chuck Size: 6" (152 mm)
Control
- Standard Features: Single Point Threading, Rigid Tapping
Warranty
- 1 Year Warranty against defects in material and workmanship. Extended Warranty available.
Accessories
- 8-Station Turret
- Gang Tooling System
- Quick Change Tool Post
- Full Enclosure
- Automatic 5C Collet Closer
Controller
- Intuitive conversational programming
- 80 GB of system program memory
- Built-in Dropbox™ support for seamlessly transferring programs